HPE 9000 and HPE e3000 Servers
1748162 Members
3824 Online
108758 Solutions
New Discussion юеВ

Re: how to configure the pc to work instead of the terminal?

 
leyearn
Regular Advisor

how to configure the pc to work instead of the terminal?

The terminal of HP N4000 failed

how to configure the pc to work intead of the terminal ?

thanks!
3 REPLIES 3
Vihang.
Trusted Contributor

Re: how to configure the pc to work instead of the terminal?

Connect the serial cable from the local console port of your N4000 to the COM port of your PC & use hyperterminal to connect to the COM port.


Regards,
Vihang.
Steven E. Protter
Exalted Contributor

Re: how to configure the pc to work instead of the terminal?

Shalom,

Connect a null modem cable to the serial port of the PC. Use hyperterminal which is an optional windows component to act as a terminal, default settings.

You could use procomm plus for windows

You could use Linux, a real OS as well.

SEP
Steven E Protter
Owner of ISN Corporation
http://isnamerica.com
http://hpuxconsulting.com
Sponsor: http://hpux.ws
Twitter: http://twitter.com/hpuxlinux
Founder http://newdatacloud.com
Robert-Jan Goossens
Honored Contributor

Re: how to configure the pc to work instead of the terminal?

Hi,

You can use following cable.

HP RS-232C CABLE-9 PIN(F)-9PIN(F)

HP Partnumber: 5184-1894

http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html
Download and install putty on your PC and use the following serial settings;
Speed (baud) 9600
Data bits 8
Stop bits 1
Parity None
Flow control XON/XOFF

Best regards,
Robert-Jan