Simpler Navigation coming for Servers and Operating Systems
Coming soon: a much simpler Servers and Operating Systems section of the Community. We will combine many of the older boards, and you won't have to click through so many levels to get at the information you need. If you are looking for an older board and do not find it, check the consolidated boards, as the posts are still there.
HP 9000
cancel
Showing results for 
Search instead for 
Did you mean: 

hp 9000 rp7420 server specification

tareq_2
Regular Advisor

hp 9000 rp7420 server specification

hi all
i need to know the specification of my server (CPUs,RAM,STORAGE(HDD,MAINBOARD,CELLBOARD) etc...
and the version of the hp-ux
is there any command to know this information.
thanks
14 REPLIES
Jeeshan
Honored Contributor

Re: hp 9000 rp7420 server specification

at a glance you can know this using the command

#print_manifest

or you can use glance

#glance

but aggregately you can use nickel script to collect all type of information in html format
a warrior never quits
Prashanth Waugh
Esteemed Contributor

Re: hp 9000 rp7420 server specification

Hi Tareg,

Use the following command,
#getconf KERNAL_BITS
it will show the cpu bit
2)glance -m
It will show physical Mem.
3)ioscan -fnC processor
It will show the no of processor
4)uname -a
it will show the OS
Regards
Prashant
For success, attitude is equally as important as ability
Prashanth Waugh
Esteemed Contributor

Re: hp 9000 rp7420 server specification

Hi tareg,

Have u install the sysinfo utility.Check it on server.
#swlist |grep "sysinfo"

If it install then it will give all server inforamtion

Regards
Prashant
For success, attitude is equally as important as ability
Deepak Kr
Respected Contributor

Re: hp 9000 rp7420 server specification

prashant,

FYI, #print_manifest will give you complete info in single command here.

No need to run a set of commands to get all.

"There is always some scope for improvement"
Bill Hassell
Honored Contributor

Re: hp 9000 rp7420 server specification

If you want a *lot* of hardware details including memory modules, cell board firmware versions, CPU versions, etc, use cstm like this:

echo "selclass qualifier all;info;wait;infolog" | cstm


Bill Hassell, sysadmin
Asif Sharif
Honored Contributor

Re: hp 9000 rp7420 server specification

Salam Tareq,

Some tools are available for detailed hardware/OS/Patches etc information like nickel ,cfg2html and sysinfo and they have the ability to produce the output in html format.

ftp://ftp.hp.com/pub/catia/Utils/nickel.shar
http://www.cfg2html.com

Regards,
Asif Sharif
tareq_2
Regular Advisor

Re: hp 9000 rp7420 server specification

hi all
I have tried the commands above and its not working. " print_manifest"+"glance"
and the command ioscan -fnC processor its show me the number of processor not the speed of processor
what i need is :- 1.cpu speed 2. Memory Capacity 3.HDD .
the command above not work.
any help please??
thanks
tareq_2
Regular Advisor

Re: hp 9000 rp7420 server specification

hi
MY operating system is hp-ux 11iv1
thanks
Prashanth Waugh
Esteemed Contributor

Re: hp 9000 rp7420 server specification

Hi Tranag

#getconf KERNAL_BITS

Is it working on ur system

Regards
Prashant
For success, attitude is equally as important as ability
Dennis Handly
Acclaimed Contributor

Re: hp 9000 rp7420 server specification

>Prashant: #getconf KERNEL_BITS (It helps if you spell it correctly. :-)

It is a waste of time doing this. The answer is always 64 on all but very old servers.
http://docs.hp.com/en/5991-6552/ch02s03.html#babcjdai
tareq_2
Regular Advisor

Re: hp 9000 rp7420 server specification

hi
im not intrested to know my system is 64 or 32 ...
just i want to know ,cpu speed, ram capacity,Hard drive, just these simple specs.
thanks
Torsten.
Acclaimed Contributor

Re: hp 9000 rp7420 server specification

The command

# /opt/ignite/bin/print_manifest

will give you many useful information.

Example:

System Hardware

Model: ia64 hp superdome server SD64B
Main Memory: 654328 MB
Processors: 96
OS mode: 64 bit
...
LAN hardware ID: 0x000000000000
LAN hardware ID: 0x000000000000
LAN hardware ID: 0x000000000000
...
Storage devices HW Path Interface
COMPAQ BD3008A4C6 286102 Mb 0/0/1/1/0.0.0 SCSI Ultra320 A6961-60011

COMPAQ BD3008A4C6 286102 Mb 0/0/8/1/0.4.0 SCSI Ultra320 A6961-60011

COMPAQ BD3008A4C6 286102 Mb 0/0/8/1/0.3.0 SCSI Ultra320 A6961-60011
...







Running

SAM -> performance monitors -> system properties

will tell you model and speed of the CPU.




Running

# parstatus

will tell you about complex details of cell-based servers.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Mustafa Gulercan
Respected Contributor

Re: hp 9000 rp7420 server specification

hi,
i have attached sysinfo script which have talked before.

regards,
mustafa
tareq_2
Regular Advisor

Re: hp 9000 rp7420 server specification

thanks for all