cancel
Showing results for 
Search instead for 
Did you mean: 

hp terminal 700/32

josh53
Occasional Visitor

hp terminal 700/32

I have a HP 700/32 Terminal, the problem is that I get no response from any keystrokes. The other keys work fine, like set-up and those. They a-z do not work
2 REPLIES
Torsten.
Acclaimed Contributor

Re: hp terminal 700/32

Toggle the "remote" option or reset everything to default by switch off, hold down "d" key while powering on.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
josh53
Occasional Visitor

Re: hp terminal 700/32

I tried the d key trick but it didn't work. It read hit enter to return, I did and it leads me back to the beginning. If it helps, whenever i hit a key, it's giving me the error noise.