HP 9000
cancel
Showing results for 
Search instead for 
Did you mean: 

processor legacy PA HEX chassis-code F04

SOLVED
Go to solution
Tom Kunkel
Frequent Advisor

processor legacy PA HEX chassis-code F04

I wonder if anyone can sched light on this problem I am having with an older rp5740. It's virtual front panel shows a rolling message as follows:

processor display_activity() update 1F00
processor legacy PA HEX chassis-code F04F

This scrolls endlessly.

There is only two entries in Google and they refer to power supplies. This server's power supplies are rock solid, with steady green lights.

FYI, this started after an update containing the following patches:

PHKL_39389
PHNE_39167
GOLDQPK11i_B.11.11.0906.480

So, I wonder if any of you had seen this and, hopefully, has some useful advice to share.
4 REPLIES
Torsten.
Acclaimed Contributor
Solution

Re: processor legacy PA HEX chassis-code F04

No need to worry, no problem.

C hassis code FxnF:

Indicates the system is running. An F in the first and fourth digits indicates the system is run-
ning normally. The x is updated every 5 seconds with the length of the run queue at that time
(an instantaneous reading not an average). It indicates the number of processes. Loads higher
than 9 display as A. The n indicates the number of processors (1, 2, 3,or 4).

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Andrew Rutter
Honored Contributor

Re: processor legacy PA HEX chassis-code F04

hi,

Go with torsten's explanation

This is perfectly noraml behaviour of the server

Presumably you are not experiencing any problems with the system? just checking it over?

Andy
Tom Kunkel
Frequent Advisor

Re: processor legacy PA HEX chassis-code F04

Thank you .. yes, I was checking and this is behaviour I had not observed previously. Good to know because soon it will be time to patch some production servers.
Tom Kunkel
Frequent Advisor

Re: processor legacy PA HEX chassis-code F04

Thanks.