Simpler Navigation coming for Servers and Operating Systems
Coming soon: a much simpler Servers and Operating Systems section of the Community. We will combine many of the older boards, and you won't have to click through so many levels to get at the information you need. If you are looking for an older board and do not find it, check the consolidated boards, as the posts are still there.
HP 9000
cancel
Showing results for 
Search instead for 
Did you mean: 

rp3440 MP access problems.

Antonio_137
Frequent Advisor

rp3440 MP access problems.

I am trying to login to the MP,but when I get th MP Login prompt,enter "Admin" and CR it jumps to the MP Login prompt again.
Any ideas...??
Thanks.
2 REPLIES
Torsten.
Acclaimed Contributor

Re: rp3440 MP access problems.

The reason could be your terminal emulator - sending double CR instead of a single CR.

What are you using? Hyperterminal with ansi emulation? Try putty!

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Antonio_137
Frequent Advisor

Re: rp3440 MP access problems.

Thanks for your answer,the problem was with the console configuration,it works ok now.