1748157 Members
4034 Online
108758 Solutions
New Discussion юеВ

Re: rp7410

 
Jon Steele
Valued Contributor

rp7410

I am installing a cell board in an RP7410.I can not find out the dip switch settings.I had 750 procs but now I am putting in 875 procs and can not find out what too change the settings to.

Thanks in advance for your help

Jon
5 REPLIES 5
Jon Steele
Valued Contributor

Re: rp7410

found the solution
Joshua Scott
Honored Contributor

Re: rp7410

Jon,

Where did you find the solution for this? I know I used to have a sheet that outlined this, but I can't seem to find it.

Thanks!
What are the chances...
Jon Steele
Valued Contributor

Re: rp7410

The switch settings for the 875 procs are
10100000 1=off .I hope this helps

Jon
Joshua Scott
Honored Contributor

Re: rp7410

Thanks!
What are the chances...
Jon Steele
Valued Contributor

Re: rp7410

Thanks
Jon