cancel
Showing results for 
Search instead for 
Did you mean: 

rp7410

Jon Steele
Valued Contributor

rp7410

I am getting the following error when I do a search command.

p0 1/0/0/3/0.6

Error:PDH NVRAM and I/O card NVRAM scsi parameters do not match for path 1/0/0/3/1 search aborted.The scsi parameters for this card must be corrected from the BCH service menu.

I have tried several things to resolve this but I have not had any luck.

Any help will be appreciated.
4 REPLIES
Cheryl Griffin
Honored Contributor

Re: rp7410

This appears to be a known issue on the rp7410 and under investigation in the labs.
"Downtime is a Crime."
Cheryl Griffin
Honored Contributor

Re: rp7410

Let me clarify my last statement, it appears that the messages can be the result of either incorrect hardware id settings or a PDC issue.

There are a couple conflicting reports stating that there might be a fix in the latest PDC revision.

I hope to have more information on the PDC udpate momentarily.
"Downtime is a Crime."
Jon Steele
Valued Contributor

Re: rp7410

Thank you for your help.I went to the service menu and set my scsi to defaults and it took care of this error
Jon Steele
Valued Contributor

Re: rp7410

Thanks
Jon