HPE 9000 and HPE e3000 Servers
1748237 Members
3693 Online
108759 Solutions
New Discussion юеВ

Re: superdome EMS report I/O link error

 
SOLVED
Go to solution
Genesis_1
Occasional Advisor

Re: superdome EMS report I/O link error

The Aclts is a script that depend on JUST.
reo_link_ac_test is the command that is used to test the reo link.

Thank you very much, Phil.
Phil uk
Honored Contributor

Re: superdome EMS report I/O link error


Sorry, the scripts etc that you have mentioned are not something that I am familiar with.
Genesis_1
Occasional Advisor

Re: superdome EMS report I/O link error

Hi, everybody, I've successfully solved this problem by replacing the reo inbound cable of the superdome. There is no doubt, it's the hardest work to replace the reo cable in the superdome. It took me a whole night to do it. Fortunately, the error doesn't occur any more. I'm so happy about it. But otherwise, I feel a little shame: the problem has been presented and has been reported to HP since the superdome was installed in 2003, and the error occured every day and there is also a error on cell1 during the power-on-self-test. The problem was so obvious, but HP CE didn't actually deal with it in the several years while just told the customer that the problem was inessential. Though I don't know what the reason is, I don't think that the problem should existed such a long time. Especially for a professional service like HP.
Anyway, thanks everybody for your help.
Phil uk
Honored Contributor

Re: superdome EMS report I/O link error


Well done changing the REO - not a nice job to do.
Unusual for a REO to have a problem - but I suspect it was bad from day 1, so well done.

Sorry HP let you down.

Regards,
Phil
Torsten.
Acclaimed Contributor

Re: superdome EMS report I/O link error

respect, changing this cable is a tough challenge ...

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Genesis_1
Occasional Advisor

Re: superdome EMS report I/O link error

I also suspect the reo cable was defective when it was produced.