HP-UX

마우스가죽었어요

 
최사구
비정기 조언자

마우스가죽었어요

l2000인데요. 키보드는 먹히는데 마우스가안대요.usb마우스고요

시스템 리부팅없이 마우스살릴수는없나요?

/dev 밑에있는 마우스관련파일지우고 insf -e하믄댄대서 해밨는데

안되더라구요. 정확히마우스관련파일이 어떤건지도 모르겠구요.

친절한답변부탁드립니다.
3 응답 3
김병수
본과생

마우스가죽었어요

rebooting을 하면 되겠지만...



rebooing을 하지 못하는 상황이라면...



mouse 가 갑자기 되지 않는 것인지요. 궁금합니다.



혹시 mouse 를 사용하던 환경이라면 CDE 일거라 생각이 드는데요..



그럼 daemon을 re-start하여 보시기 바랍니다



# /sbin/init.d/dtlogin.rc stop



# /sbin/init.d/dtlogin.rc start



또는 # dmesg 나 다른 log는 없나요..



그럼~~~



고광태
중학생

마우스가죽었어요

L2000 장비면 따로 마우스 디바이스 가지고있질 않습니다.



그래픽 콘솔을 사용하시는것 같은데..



콘솔를 리부팅해보시는게 좋을듯하네요..시스템하고는 상관이 없으니깐요..
Joseph
초등학생

마우스가죽었어요

ITRC에 님이 원하는 자료가 있습니다..

다음의 해당패치를 적용하면 마우스와 키보드를 운영중에 Remove or Connect할 수 있습니다...



Good day~~



ITRC문서중............................................



PROBLEM

Is it possible to remove or connect the USB mouse and keyboard when the Xserver is running?





RESOLUTION

The ability to dynamically disconnect/reconnect USB input devices has been added to the Xserver through the following patches. As a result, if the USB mouse and/or keyboard are removed from the system, the Xserver will be able to use them when they are reconnected to the host.



HP-UX 11.23 (IPF)



PHSS_30502 Xserver cumulative patch

PHKL_29562 HW enablement: gvid graphics multicard

(dependency for PHSS_30502)

NOTE: The USB input devices (mouse and keyboard) are ONLY hot-swappable while the Xserver is running. They cannot be hot-swapped on EFI shell mode.



HP-UX 11.11 (PA-RISC)



PHSS_30871 Xserver cumulative patchHP-UX 11.00 (PA-RISC)



PHCO_26447 USB hot attach/detach daemon

PHSS_30188 Xserver cumulative patch



To determine if you already have these patches installed, use the /usr/bin/swlist utility. For example:



# /usr/bin/swlist -l product | grep PHSS_30502





CORRESPONDING LOG FILES

HP-UX 11.23 (IPF)



Information regarding whether the USB input devices (mouse and keyboard) are connected or disconnected, is stored in the /var/X11/Xserver/logs/Xf86.0.log log file:



Example 1 (DISCONNECTED):



(II) Mouse0: Core pointer device detachedExample 2 (CONNECTED):



(**) Option "Device" "NULL"

(**) Option "Device" "/dev/hid/mouse_000"

(II) Mouse0: Core pointer device attached and re-initializedNOTE: No log information will be displayed by the /usr/sbin/dmesg utility or in the /var/adm/syslog/syslog.log log file.





HP-UX 11.00 / 11.11 (PA-RISC)



Information regarding whether the USB input devices (mouse and keyboard) are connected or disconnected, is stored in the /var/dt/Xerrrors log file:



Example 1 (DISCONNECTED):



Core pointer device detached - temporarily using 'null' pointer

Core keyboard device detached - temporarily using 'null' keyboardExample 2 (CONNECTED):



Detected added keyboard device - configuring as core keyboard

Detected added pointer device - configuring as core pointerWhen the USB input devices are connected to the system, the /usr/sbin/dmesg utility will contain the hardware paths and "hid" formats for the devices.



For example:



10/0/14/2.1.2 hid

10/0/14/2.1.3 hid



******************************************************************************

This implementation has NOT been tested for HP-UX 11.11 (PA-RISC); however, the functionality should exist.



This functionality is NOT available for HP-UX 10.20, refer to Defect Report, JAGaf08803, for more information.



******************************************************************************