HP-UX

시스템 부팅이 안됩니다.

 
이회선
조언자

시스템 부팅이 안됩니다.

시스템은 L2000 서버인데 다음과 같은 메시지가 나오면서 부팅이 안됩니다. 원인과 해결방법좀 알려주세요.



platform test 6129

I/O config 8236

platform test 613F

platform test 613D

unknown, no source stated legacy PA HEX chassis-code CE00

unknown, no source stated legacy PA HEX chassis-code CE01

unknown, no source stated legacy PA HEX chassis-code CE62

unknown, no source stated legacy PA HEX chassis-code CE63

unknown, no source stated legacy PA HEX chassis-code CE63

unknown, no source stated legacy PA HEX chassis-code CE63

unknown, no source stated legacy PA HEX chassis-code CE64

unknown, no source stated legacy PA HEX chassis-code CE69

unknown, no source stated legacy PA HEX chassis-code CE70

unknown, no source stated legacy PA HEX chassis-code CE71

unknown, no source stated legacy PA HEX chassis-code CE72

unknown, no source stated legacy PA HEX chassis-code CE73

unknown, no source stated legacy PA HEX chassis-code CE74

unknown, no source stated legacy PA HEX chassis-code CE75

unknown, no source stated legacy PA HEX chassis-code CE76

unknown, no source stated legacy PA HEX chassis-code CE77

unknown, no source stated legacy PA HEX chassis-code CE78

unknown, no source stated legacy PA HEX chassis-code CE0F

processor legacy PA HEX chassis-code CEE0



***** EARLY BOOT VFP : SYSTEM ALERT *****

SYSTEM NAME: L2000

DATE: 01/10/2008 TIME: 07:31:43

ALERT LEVEL: 12 = Software failure



REASON FOR ALERT

SOURCE: 1 = processor

SOURCE DETAIL: 1 = processor general SOURCE ID: 0

PROBLEM DETAIL: 0 = no problem detail



LEDs: RUN ATTENTION FAULT REMOTE POWER

FLASH FLASH FLASH ON ON

LED State: Unexpected Reboot. Running non-OS code. Non-critical error detected.

Check Chassis and Console Logs for error messages.



0xF8E000C01100B800 00000000 0000B800 - type 31 = legacy PA HEX chassis-code

0x58E008C01100B800 00006C00 0A071F2B - type 11 = Timestamp 01/10/2008 07:31:43

A/a: ack read of this entry - Q/q: quit Virtual Front Panel Display

Anything else redisplay the log entry

->Choice:Timeout!

*****************************************
3 응답 3
양계전
초등학생

시스템 부팅이 안됩니다.

Q로 빠져나가신 다음에



SL -> E 로 로그를 확인 해보세요.



CPU에 문제가 있는걸로 보이는데 정확한건 아닙니다.



monoworld
정기 조언자

시스템 부팅이 안됩니다.

아래와 비슷한 증상이면

boot 패스 찾지 못해서 발생하는 문제인것 같습니다.

디스크가 나갔거나, 스카시 패스 이상하거나, 부트 커널 손상때문 이거나

원인은 좀더 정보가 있어야 할거 같은데

우선 미러 디스크 패스로 부팅해보세요.







************* SYSTEM ALERT **************

SYSTEM NAME: uninitialized

DATE: 06/07/2004 TIME: 19:13:30

ALERT LEVEL: 12 = Software failure



REASON FOR ALERT

SOURCE: 1 = processor

SOURCE DETAIL: 1 = processor general SOURCE ID: 0

PROBLEM DETAIL: 0 = no problem detail



LEDs: RUN ATTENTION FAULT REMOTE POWER

FLASH FLASH OFF OFF ON

LED State: Running non-OS code. Non-critical error detected.

Check Chassis and Console Logs for error messages.



0xF8E020C01100B900 00000000 0000B900 - type 31 = legacy PA HEX

chassis-code

0x58E028C01100B900 00006805 07130D1E - type 11 = Timestamp 06/07/2004

19:13:30

A: ack read of this entry - X: Disable all future alert messages

Anything else skip redisplay the log entry

->Choice:a

*****************************************



************* SYSTEM ALERT **************

SYSTEM NAME: uninitialized

DATE: 06/07/2004 TIME: 19:13:30

ALERT LEVEL: 12 = Software failure



So what's wrong here ?





RESOLUTION



There are a few reasons:



1) The boot string is not correct:



Boot

: disk(0;0)/stand/vmunix <<<---- here , this is not correct



Because usually it should tell us the hardware path of boot device for example

in my case:

Boot

: disk(1/0/0/2/0.6.0.0.0.0.0;0)/stand/vmunix <<<-- here



Solution:

---------



- Use mkboot to place boot utilities in the boot area:



# mkboot -l /dev/rdsk/cXtYdZ <--- where cXtYdZ boot disk



- Use mkboot to add an AUTO file in boot LIF area:



# mkboot -a "hpux" /dev/rdsk/cXtYdZ <--- where cXtYdZ boot disk



- Check the contents of the AUTO file with



# lifcp /dev/rdsk/cXtYdZ:AUTO -



- shutdown the server and test again



2) Make sure the boot definition is correct. Verify with:



# lvlnboot -v



For example:



# lvlnboot -v

Current path "/dev/dsk/c1t0d0" is an alternate link, skip.

Boot Definitions for Volume Group /dev/vg00:

Physical Volumes belonging in Root Volume Group:

/dev/dsk/c0t15d0 (8/4.15.0) -- Boot Disk

Boot: lvol1 on: /dev/dsk/c0t15d0

Root: lvol3 on: /dev/dsk/c0t15d0

Swap: lvol2 on: /dev/dsk/c0t15d0

Dump: lvol2 on: /dev/dsk/c0t15d0, 0



If there is something wrong in the boot definition, then fix them with:



# lvlnboot -R or

# lvlnboot -b /dev/vg00/lvol1

# lvlnboot -r /dev/vg00/lvol3

# lvlnboot -s /dev/vg00/lvol2

# lvlnboot -d /dev/vg00/lvol2



이태곤
중학생

시스템 부팅이 안됩니다.

안녕하십니까



Reporting Entity Type: 0xe(14) - HP-UX

Reporting Entity ID: 0x00( 0) - Cabinet 0, Cell 0, CPU 0

Caller Activity: 0xb(11) - system panic

Caller Subactivity: 0x80(128) - Implementation Dependent

Activity Status: 0x0( 0) - platform dependent



CPU 0번을 바꼈보십시오