이벤트 로그 분석좀 드립니다.

Cho Joon Yeon
비정기 기여자

이벤트 로그 분석좀 드립니다.

안녕하세요. hpux 를 접한지 얼마되지 않은 신입이라 많은 도움좀 부탁드립니다. 제가 점검중에 eventlog 에서 의문점이 생겨 질문드립니다. 로그 내용은 다음과 같습니다.

Event data from monitor:

Event Time..........: Thu Apr 1 10:33:40 2010
Severity............: CRITICAL
Monitor.............: gazemon
Event #.............: 100091
System..............: devbiap1

Disk at hardware path 0/1/1/0.1.0 : Software configuration error

Description of Error:

The device is in a condition where it requires action on the part of the
device driver or a human operator.

Probable Cause / Recommended Action:

The device has been reset by a Bus Device Reset message, a hard reset
condition, or a power-on reset.

If this is the case, no action is necessary.

Alternatively, a removable medium has been loaded or replaced.

If this is the case, no action is necessary.

Alternatively, the mode parameters, microcode, or inquiry data for the
device have been changed.

If this is the case, no action is necessary.

Alternatively, the installed version of the device driver does not match
that of the installed version of HP-UX. Install the correct version of the

Additional Event Data:
System IP Address...:
Event Id............: 0x4bb3f7f400000002
Monitor Version.....: B.01.00
Event Class.........: I/O
Client Configuration File...........:
Client Configuration File Version...: A.01.01
Qualification criteria met.
Number of events..: 1
Associated OS error log entry id(s):
Additional System Data:
System Model Number.............: ia64 hp server rx4640
EMS Version.....................: A.04.20
STM Version.....................: C.54.00
Latest information on this event:

v-v-v-v-v-v-v-v-v-v-v-v-v D E T A I L S v-v-v-v-v-v-v-v-v-v-v-v-v

Product/Device Identification Information:

Logger ID.........: sdisk
Product Identifier: SCSI Disk
Product Qualifier.: HP146
SCSI Target ID....: (not available/applicable)
SCSI LUN..........: (not available/applicable)

I/O Log Event Data:

Driver Status Code..................: 0x0000000B
Length of Logged Hardware Status....: 22 bytes.
Offset to Logged Manager Information: 24 bytes.
Length of Logged Manager Information: 34 bytes.

Hardware Status:

Raw H/W Status:
0x0000: 00 00 00 02 70 00 06 00 00 00 00 0A 00 00 00 00
0x0010: 29 02 02 00 00 00

SCSI Status...: CHECK CONDITION (0x02)
Indicates that a contingent allegiance condition has occurred. Any
error, exception, or abnormal condition that causes sense data to be
set will produce the CHECK CONDITION status.

SCSI Sense Data:

Undecoded Sense Data:
0x0000: 70 00 06 00 00 00 00 0A 00 00 00 00 29 02 02 00
0x0010: 00 00

SCSI Sense Data Fields:
Error Code : 0x70
Segment Number : 0x00

Bit Fields:
Filemark : 0
End-of-Medium : 0
Incorrect Length Indicator : 0
Sense Key : 0x06
Information Field Valid : FALSE
Information Field : 0x00000000
Additional Sense Length : 10
Command Specific : 0x00000000
Additional Sense Code : 0x29
Additional Sense Qualifier : 0x02
Field Replaceable Unit : 0x02
Sense Key Specific Data Valid : FALSE
Sense Key Specific Data : 0x00 0x00 0x00

Sense Key 0x06, UNIT ATTENTION, indicates that the target has been
reset by a BUS DEVICE RESET message, a hard reset condition, or by a
power-on reset. If not a reset, then one of the following may have
1. A removable medium may have been changed.
2. The mode parameters in effect for this initiator have been
changed by another initiator.
3. The version or level of microcode has been changed.
4. Tagged commands queued for this initiator were cleared by
another initiator.
5. INQUIRY data has been changed.
6. The mode parameters in effect for this initiator have been
restored from non-volatile memory.
7. A change in the condition of a synchronized spindle.
8. Any other event that requires the attention of the initiator.

The combination of Additional Sense Code and Sense Qualifier (0x2902)
indicates: SCSI bus reset occurred.

SCSI Command Data Block: (not present in log record)

박주경 ( /야옹/ 돌돌돌, 천국보다 더 아름다운 ¸ ) 님의 말 :
Raw Manager Data:
0x0000: 02 1A 06 30 00 00 20 00 00 00 00 02 00 00 00 00
0x0010: 02 01 00 12 F0 00 00 0A 28 00 09 23 C3 D2 00 00
0x0020: 10 00

>---------- End Event Monitoring Service Event Notification ----------<
1 응답 1

이벤트 로그 분석좀 드립니다.

장비 모델명이 뭔가요?

HW Path 0/1/1/0.1.0 의 146G 쪽 디스크에 문제가 있어보입니다.

조만간 교체를 하셔야 할듯합니다 ~