Skip to ContentSkip to Footer
시작 내용
- Community Home
- >
- HPE Community, Korea
- >
- HP-UX
- >
- 현재 장비의 온도를 알수있는 방법이 있는지요?
HP-UX
-
- Forums
-
- Advancing Life & Work
- Advantage EX
- Alliances
- Around the Storage Block
- HPE Ezmeral: Uncut
- OEM Solutions
- Servers & Systems: The Right Compute
- Tech Insights
- The Cloud Experience Everywhere
- HPE Blog, Austria, Germany & Switzerland
- Blog HPE, France
- HPE Blog, Italy
- HPE Blog, Japan
- HPE Blog, Middle East
- HPE Blog, Latin America
- HPE Blog, Russia
- HPE Blog, Saudi Arabia
- HPE Blog, South Africa
- HPE Blog, UK & Ireland
-
Blogs
-
정보
- 커뮤니티
- Welcome
- 시작하기
- 포럼 FAQ
- 랭킹 개요
- 참여규칙
- Tips and Tricks
- 접촉
- Announcements
- Email us
- Feedback
- Information Libraries
- Integrated Systems
- Networking
- Servers
- Storage
- 다른 HPE 사이트
- Support Center
- Aruba Airheads Community
- Enterprise.nxt
- HPE Dev Community
- Cloud28+ Community
- Marketplace
-
포럼
-
블로그
-
정보
-
한국어
1 응답 1
- 신규로 표시
- 북마크
- 구독
- 소거
- RSS 피드 구독
- 강조
- 인쇄
- 친구에게 이메일 보내기
- 부적절한 컨텐트 신고
날짜: 11-13-2008 11:00 PM
날짜: 11-13-2008 11:00 PM
현재 장비의 온도를 알수있는 방법이 있는지요?
HP-UX is monitoring the temp, see
http://docs.hp.com/en/B3921-60631/envd.1M.html
You can try to get the status from the GSP/MP/iLO - some examples:
BL860c:
MP:CM> ps
PS
For System Processor Status see the SS command.
For Power Supply and Fan status see the Onboard Administrator.
System Power state : On
System Power usage : 203 Watts
System Power allocation : 255 Watts
Ambient temperature : 24 C
Temperature status : Normal
Over Temperature protection: Enabled
rx2660:
MP:CM> ps
PS
For System Processor Status see the SS command.
System Power state: On
System Power usage: 239 Watts
Temperature : Normal
rp7420:
MP:CM> de
Display status of the selected MP entity (for use by trained personnel only)
B - BPS (Bulk Power Supplies)
U - CLU (Cabinet Utilities: Fans, Intrusion, Clock's etc.)
A - PACI (Partition Console Interface)
G - MP (Management Processor)
P - PM (Power Management)
H - Cell Board Controller (PDHC)
Select device: u
Cabinet 0 Utilities Status
FW Revision : 8.005 built Sep 26 2006 at 16:11:20
PWR SBY MP RUN REM ATT FLT
Front Panel LED State : * * * . . . .
Inlet Air Temperature : 20 deg C
Altimeter Status : OK
Operating Altitude : 2000 - 4000 ft (608m - 1216m)
Fan Rate ( rpm/30 ) : Standby Main I/O
97 97 95
위에 명시된 의견은 Hewlett Packard Enterprise가 아닌 저자의 개인 의견입니다. 이 사이트를 사용하면 이용 약관에 동의하게되며 참여 규칙 .