HP-UX

EMS 이벤트 관련입니다.

 
최종현
비정기 기여자

EMS 이벤트 관련입니다.

안녕하십니까 현재 rp8420 장비 운용중 아래와 같은 EMS메시지를



확인하게 되었습니다. 조치할 수 있는 방법이 어떤것들이 있는지



확인하고 싶습니다.



CURRENT MONITOR DATA:



Event Time..........:

Severity............: SERIOUS

Monitor.............: dm_core_hw

Event #.............: 25

System..............:



Summary:

Chassis code logging failure





Description of Error:



An attempt by the operating system to log a chassis code failed.



Probable Cause / Recommended Action:



Communications between the processor dependent code (PDC) and the service

processor has failed.

Verify service processor operation. Enter chassis log manually with

service processor commands.



Additional Event Data:

System IP Address...:

System IP Address...: System IP Address...:



Event Id............: 0x4586bf7300000000

Monitor Version.....: B.01.00

Event Class.........: System

Client Configuration File...........:

/var/stm/config/tools/monitor/default_dm_core_hw.clcfg

Client Configuration File Version...: A.01.00

Qualification criteria met.

Number of events..: 1

Associated OS error log entry id(s):

0x4586bf7200000000

Additional System Data:

System Model Number.............: 9000/800/rp8420

OS Version......................: B.11.11

STM Version.....................: A.47.00

EMS Version.....................: A.04.00

Latest information on this event:

http://docs.hp.com/hpux/content/hardware/ems/dm_core_hw.htm#25



v-v-v-v-v-v-v-v-v-v-v-v-v D E T A I L S v-v-v-v-v-v-v-





An attempt by the operating system (OS) to do a chassis log write function

failed.

The chassis code that the OS was trying to write was:

Encoded chassis code: 0x78e008041100f000

Data field: 0x0000000200000002

The processor dependent code returned the status -5. Possible status values:

-1 = Unimplemented procedure.

-2 = Nonexistent Option.

-3 = Call completed with error.

-10 = Invalid argument.

3 응답 3
김병수
본과생

EMS 이벤트 관련입니다.

RP8420이라면 HP에서 직접 지원하는model인것으로 알고 있는데

문의 해 보시면 좋을듯합니다.



잘은 모르겠으나 이와 관련된 이슈가 RP8420에 있네요.





This issue will be addressed in new PDHC firmware that is part of the upcoming

firmware release.



Until the Firmware is available, you can recover from the WATCHDOG Reset and

get the OS talking to the MP again by doing the following...

(This is safe to do with the partition up and running)

- Connect to the MP

- go into "cm"

- reset the utility interface to the core cell of the partition using the "ru"

command.



Here is an example where Cell-0 is the core cell:

MP:CM> ru

This command resets the selected MP bus device.

B - BPS (Bulk Power Supply)

A - PACI (Partition Console Interface)

G - MP (Management Processor)

H - PDHC (Cell Board Controller)

Select device: h

Enter cell number: 0

Do you want to reset the Cell PDH Controller Slot 0? (Y/) y

-> The selected MP bus device will be reset.



참고하시기 바랍니다.

그럼~~~



이태곤
중학생

EMS 이벤트 관련입니다.

안녕하십니까



Cell B/D을 사용하는 서버에서 가끔 볼수 있는 메시지 인것 같습니다.



STM 버전을 A.5x.xx 로 올리시고 서버 firmware update 하시는 것이 좋



을듯합니다.



최종현
비정기 기여자

EMS 이벤트 관련입니다.

이미 펌웨어 업데이트 예정 장비였는데 미쳐 확인을 못했었습니다. ^^;



감사합니다.



아... 포인트 수정하려는데 안돼네요 ㅠㅠ 죄송합니다.