EMS event 100776 에 대해 문의드립니다.

[ioscan]

EMS event 에 아래와 같은 메세지가 나옵니다.

혹시 비슷한 경우나 아시는 분 있으시면 도움 부탁드립니다...



CURRENT MONITOR DATA:



Event Time..........: Wed Dec 6 20:07:21 2006

Severity............: SERIOUS

Monitor.............: disk_em

Event #.............: 100776

System..............: rx7620



Summary:

Disk at hardware path 1/0/4/1/0.1.13.0.0.0.5 : Software configuration error



Description of Error:

The device was unsuccessful in processing the current request message because the message contained an invalid field in the command data block.The request was not processed.



Probable Cause / Recommended Action:

The error most likely indicates that the device is not fully supported by the current driver. This may or may not cause a problem in the operation of the device.



Additional Event Data:

System IP Address...: xxx.xxx.xxx.xxx

Event Id............: 0x4576a46900000002

Monitor Version.....: B.01.01

Event Class.........: I/O

Client Configuration File...........:

/var/stm/config/tools/monitor/default_disk_em.clcfg

Client Configuration File Version...: A.01.00

Qualification criteria met.

Number of events..: 1

Associated OS error log entry id(s):

None

Additional System Data:

System Model Number.............: ia64 hp server rx7620

OS Version......................: B.11.23

STM Version.....................: C.54.00

EMS Version.....................: A.04.20

Latest information on this event:

http://docs.hp.com/hpux/content/hardware/ems/scsi.htm#100776



v-v-v-v-v-v D E T A I L S v-v-v-v-v-v-v-v-v-v-v-v-v



Component Data:

Physical Device Path...: 1/0/4/1/0.1.13.0.0.0.5

Device Class...........: Disk

Inquiry Vendor ID......: DGC

Inquiry Product ID.....: CX600WDR5

Firmware Version.......: HP03

Serial Number..........: CK200033500770



Product/Device Identification Information:



Logger ID.........: disc30; sdisk

Product Identifier: Disk

Product Qualifier.: DGC CX600WDR5

SCSI Target ID....: 0x00

SCSI LUN..........: 0x05



SCSI Command Data Block:



Command Data Block Contents:

0x0000: 1A 00 1C 00 FF 00



Command Data Block Fields (6-byte fmt):

Command Operation Code...(0x1A)..: MODE SENSE

Logical Unit Number..............: 0

DBD Bit..........................: 0

Page Control Bits................: 0

Page Code Bits...................: 28

Allocation Length................: 255 (0xFF)



Hardware Status: (not present in log record).



SCSI Sense Data:

Undecoded Sense Data:

0x0000: 70 00 05 00 00 00 00 0A 00 00 00 00 24 00 00 00

0x0010: 00 00

SCSI Sense Data Fields:

Error Code : 0x70

Segment Number : 0x00

Bit Fields:

Filemark : 0

End-of-Medium : 0

Incorrect Length Indicator : 0

Sense Key : 0x05

Information Field Valid : FALSE

Information Field : 0x00000000

Additional Sense Length : 10

Command Specific : 0x00000000

Additional Sense Code : 0x24

Additional Sense Qualifier : 0x00

Field Replaceable Unit : 0x00

Sense Key Specific Data Valid : FALSE

Sense Key Specific Data : 0x00 0x00 0x00



Sense Key 0x05, ILLEGAL REQUEST, indicates that there was an illegal parameter in the command data block or in the additional parameters supplied as data for some commands (FORMAT UNIT, SEARCH DATA, etc.).

This sense key may also indicate that an invalid IDENTIFY message was received.



The combination of Additional Sense Code and Sense Qualifier (0x2400)

indicates: Invalid field in cdb.

[서종문]

Event 100776





Code:0x24 Qualifier:0x00 Key:0x05 Status:0xXX

Device: ALL

Severity: SERIOUS

Event Summary: Software configuration error

Problem Description: The device was unsuccessful in processing the current request message because the message contained an invalid field in the command data block. The request was not processed.

Probable Cause / Recommended Action: The error most likely indicates that the device is not fully supported by the current driver. This may or may not cause problem in operation of the device.

[ioscan]

관심가지고 질문에 도움주셔서 감사합니다.

단, 질문 내용과 중복되는 부분이라서...