EMS event

 
김권영
기여자

EMS event

syslog쪽에

/opt/resmon/bin/resdata -R 183107586 -r

/system/events/chassis/chassis_log -n 183107585 -a

라 나와서 보니깐

아래와 같이 나왔는데...

내용을 잘 몰라서 이렇게 부탁 드립니다...



ARCHIVED MONITOR DATA:



Event Time..........: Sat Aug 7 22:01:30 2004

Severity............: SERIOUS

Monitor.............: dm_chassis

Event #.............: 11

System..............: pmdb01



Summary:

Software failure.



Description of Error:

The first encoded field of this chassis log was not found in the internal

chassis code table. Therefore, no description text is available for this

chassis log. Enter the "details" key to view the fully decoded chassis

log.

Probable Cause / Recommended Action:



Cause:

The first encoded field (0xf8e0c7c01100be00) of this chassis log was

not found in the internal chassis code table. This chassis code may

have been added since the monitor was last changed.



Action:

Possible ways to decode this chassis code:

1) Load a more current version of the OnlineDiag software depot

(Support Tools). Installing this depot automatically installs

the EMS hardware monitors (if you have modified the default

settings, additional configuration may be required.) Almost

all chassis codes for a computer system should be supported in

the dm_chassis monitor in the first diagnostic release that

appears after the computer system has been released. The EML

monitor release notes for the diagnostic release may have more

information.

2) Contact HP support. They may have access to a more current

set of chassis codes, for example, through a chassis code

decoder program.



Additional Event Data:

System IP Address...: 10.228.41.13

Event Id............: 0x4114d2aa00000004

Monitor Version.....: A.01.00

Event Class.........: System

Client Configuration File...........:

/var/stm/config/tools/monitor/default_dm_chassis.clcfg

Client Configuration File Version...: A.02.00

Qualification criteria met.

Number of events..: 1

Associated OS error log entry id(s):

None

Additional System Data:

System Model Number.............: 9000/800/SD16000

EMS Version.....................: A.03.20

STM Version.....................: A.38.00

Latest information on this event:

http://docs.hp.com/hpux/content/hardware/ems/dm_chassis.htm#11



v-v-v-v-v-v-v-v-v-v-v-v-v D E T A I L S v-v-v-v-v-v-v-v-v-v-v-v-v





Chassis Log Timestamp : 08/07/2004 21:16:58

Chassis Code Encoded Field : 0xf8e0c7c01100be00

Alert Level : 12 (Software failure.)

Source FRU : 1 (processor)

Source FRU Detail : 1 (processor general)

Source ID : 0 (platform dependent)

Event Detail : 0 (no problem detail )

Caller Activity : 11 (system panic)

Caller Subactivity : 224 (implementation dependent)

Activity Status : 0 (implementation dependent)

Reporting Entity Type : 14 (HP-UX)

Reporting Entity ID : 12

Data Type : 31 (legacy PA HEX chassis code)

Message ID : 7

Chassis Code Data Field : 0x000000000000be00

Legacy PA Chassis : 48640
3 응답 3
고광태
중학생

EMS event

제가 보기에는 ems ( event monitoring serive ) 와 stm (online diag tool) 버전을 업그레이드하면 위와 같은 메세지는 뜨지 않을것 같네요..



즉 현재 버전에서 chasis code 의 값들은 제대로 확인하고 모니터링 해줘야하는데 그걸 제대로 못해서 나는 에러인듯하네요..



software.hp.com 에서 검색하면 다운로드 받을실수있습니다.



참조하세요..
김병수
본과생

EMS event

Action에 나왔있는 것처럼 stm을 upgrade하여 보시기 바랍니다.



http://www.software.hp.com에서 download하신후에..



# /sbin/init.d/diagnostic stop



stm 을 upgrade합니다.



# /sbin/init.d/diagnostic start



# mstm -c



하시면 설치된 version을 확인하실수 있습니다.



그럼~~
이태곤
중학생

EMS event

다음은 EVENT ID 11에 관한 내용입니다.



Event 11



Severity: SERIOUS

Event Class: System

Event Summary: Software failure.

Problem Description: The first encoded field of this chassis log was not found in the internal chassis code table. Therefore, no description text is available for this chassis log. Please check http://docs.hp.com/hpux/content/hardware/ems/dm_chassis.htm to search by the chassis code.

Probable Cause / Recommended Action: The first encoded field (0xNNNNNNcNNNNNNNNN) of this chassis log was not found in the internal chassis code table. This chassis code may have been added since the monitor was last changed. Possible ways to decode this chassis code:

Load a more current version of the OnlineDiag software depot (Support Tools). Installing this depot automatically installs the EMS hardware monitors (if you have modified the default settings, additional configuration may be required.) Almost all chassis codes for a computer system should be supported in the dm_chassis monitor in the first diagnostic release that appears after the computer system has been released. The EML monitor release notes for the diagnostic release may have more information.

Contact HP support. They may have access to a more current set of chassis codes, for example, through a chassis code decoder program.

Note: N means a digit 0 to 9.



-----



chassis code 0xf8e0c7c01100be00 에 대한 내용을 가지고 있지 못한것에 대한 경고입니다.

Load a more current version of the OnlineDiag software depot (최신의 support tool로 업데이트 하십시오)