HP-UX

Ignite-UX Revision C.7.8.201 설치 후 에러입니다.

 
서동진_2
비정기 기여자

Ignite-UX Revision C.7.8.201 설치 후 에러입니다.

Ignite-UX C.7.8.201 설치 후 실행시 에러가 발생합니다.



* Creating local directories for configuration files and archive.



======= 07/16/09 15:00:53 KST Started make_tape_recovery. (Thu Jul 16 15:00:53 KST 2009)

@(#)Ignite-UX Revision C.7.8.201

@(#)ignite/net_recovery (opt) Revision: /branches/IUX_RA0903/ignite/src@76987 Last Modified: 2009-02-05 15:45:55 -0700

(Thu, 05 Feb 2009)



* Checking Versions of Ignite-UX filesets

* Scanning system for IO devices...

* Boot device is: 6/0/1/1/0.1.0.0.0.0.1

* Creating System Configuration.

* /opt/ignite/bin/save_config -f /var/opt/ignite/recovery/2009-07-16,15:00/system_cfg vg00

* Backing Up Volume Group /dev/vg00

* /usr/sbin/vgcfgbackup /dev/vg00

* Creating Map Files for Volume Group /dev/vg00

* /usr/sbin/vgexport -s -p -m /etc/lvmconf/vg00.mapfile /dev/vg00



* Backing Up Volume Group /dev/vg11

* /usr/sbin/vgcfgbackup /dev/vg11

* Creating Map Files for Volume Group /dev/vg11

* /usr/sbin/vgexport -s -p -m /etc/lvmconf/vg11.mapfile /dev/vg11



* Backing Up Volume Group /dev/vglock

* /usr/sbin/vgcfgbackup /dev/vglock

* Creating Map Files for Volume Group /dev/vglock

* /usr/sbin/vgexport -s -p -m /etc/lvmconf/vglock.mapfile /dev/vglock



* Creating Control Configuration.

* Creating Archive File List

* Creating Archive Configuration



* /opt/ignite/lbin/make_arch_config -c /var/opt/ignite/recovery/2009-07-16,15:00/archive_cfg -g

/var/opt/ignite/recovery/2009-07-16,15:00/flist -n 2009-07-16,15:00 -r ipf -b 64 -d Recovery\ Archive -t 22 -i 1 -m t

* Saving the information about archive to /var/opt/ignite/recovery/previews

* Creating The Tape Archive

WARNING: You are about to create an Itanium-based recovery tape. If this system does NOT support direct tape boot, you will need

to perform "two-step media recovery" where the boot media (CD or DVD) has the same version of Ignite-UX as the version on

this tape.

NOTE: File: /var/tmp/tmp_cfg_file is not world-readable, this may cause clients to fail to read it during an installation.

ERROR: The /opt/ignite/boot/hpux.efi does not exist or is not readable.

ERROR: System Error, /opt/ignite/bin/make_ipf_tape failed creating IPF boot tape.

ERROR: Failed to generate LIF on tape.





======= 07/16/09 15:01:44 KST make_tape_recovery completed unsuccessfully
2 응답 2
김병수
본과생

Ignite-UX Revision C.7.8.201 설치 후 에러입니다.

기존에 설치된 ignite 을 지우시고, download한 ignite로 재설치한 다음 수행하여 보시기 바랍니다.



그럼~~
강용문
조언자

Ignite-UX Revision C.7.8.201 설치 후 에러입니다.

swremove 를 실행시키기면 목록중에 ignite 버젼이 두개 있을겁니다.



하나는 기존것 / 하나는 새로 설치한것.



그중 기존것을 삭제 하시고 백업을 돌리시면 잘 수행될것입니다.



삭제해도 안된다면 tape을 새것으로 바꿔서 시도해 보는것도 좋을듯합니다.