말씀하신 대로 바꿔서 mstm을 실행했습니다.
그런데 데몬이 안떠 있어서 안되는것 같습니다.
sbin/init.d/init.d/diagnostic start 하면 데몬이 떠야 하는데 안떠서
find 로 찾아 봤는데 없는 걸로 나왔습니다.';
Error
An unexpected error was encountered while attempting to retrieve the
host info for hostname (dwpro).
This could be due to any of the following conditions:
1) The support tool daemon "diagmond" may not be running on that system.
Use the STM Startup command (in the administration menu under the
file menu.)
2) The remote system is running an obsolete version of STM. To
communicate successfully, update the diagnostics on the remote
system to STM version B.40.00 or later.
3) The support tool daemon "diagmond" on that system may be configured
to only allow local connections. Check the value of the configuration
parameter LOCAL_ONLY_ENABLE in the /var/stm/config/sys/diagmond.cfg
file or for the existence of the /var/stm/config/sys/local_only file
on that system.
4) The diagnostic system on this system may be configured
**** v m o r e v **** v m o r e v **** v m o r e v ****
