dmesg 메세지 확인 부탁드립니다.

[김호식_2]

mpc_bindlwp: Overriding conflicting mandatory binding!

mpc_bindlwp: Migrating process 18445 from processor 1 to processor 0!

mpc_bindlwp: Overriding conflicting mandatory binding!

mpc_bindlwp: Migrating process 18445 from processor 1 to processor 0!

mpc_bindlwp: Overriding conflicting mandatory binding!

mpc_bindlwp: Migrating process 18445 from processor 1 to processor 0!

mpc_bindlwp: Overriding conflicting mandatory binding!

mpc_bindlwp: Migrating process 18446 from processor 2 to processor 0!

mpc_bindlwp: Overriding conflicting mandatory binding!

mpc_bindlwp: Migrating process 18446 from processor 2 to processor 0!

mpc_bindlwp: Overriding conflicting mandatory binding!

mpc_bindlwp: Migrating process 18446 from processor 2 to processor 0!

mpc_bindlwp: Overriding conflicting mandatory binding!

mpc_bindlwp: Migrating process 18448 from processor 3 to processor 0!

mpc_bindlwp: Overriding conflicting mandatory binding!

mpc_bindlwp: Migrating process 18448 from processor 3 to processor 0!

mpc_bindlwp: Overriding conflicting mandatory binding!

mpc_bindlwp: Migrating process 18448 from processor 3 to processor 0!

[Joseph]

itrc 문서를 참고하세요^^



- itrc 문서 -

Patch REQUIRED for multiple CPUs (HP-UX 11.00)



PHKL_21420: s700_800 11.00 specify diag2 as MP-safe



Patch PHKL_21420 is required to fix a problem with the CPU Info tool that occurred on Multiple-Processor (MP) systems on HP-UX 11.00 only. The CPU Info tool was causing numerous warning messages to be logged to the file /var/adm/syslog/syslog.log. The messages logged were similar to:

mpc_bindlwp: Migrating process 3269 from processor 30 to processor 0!

mpc_bindlwp: Overriding conflicting mandatory binding!



This problem was due to non-MP-safe calls being made when one of the CPUs above 0 was selected. PHKL_21420 is a kernel patch and requires a reboot.

[김병수]

patch를 적용해야 합니다.



윗분이 말슴하신대로 특정patch를 적용하셔도 되지만,



제생각엔 최신의 version에 맞는 bunble patch를 설치하시기를 권장합니다.



그럼~~

[이태곤]

음~ site 에서 해결한적이...



다른분들처럼 diag patch을 적용하시면 해결됩니다.

그리고 추가로 online diag (support plus)도 최신 버전으로

설치하시면 좋습니다.



그럼 좋은 하루 되시기를....

[고광태]

http://www.docs.hp.com/cgi-bin/otsearch/getfile?id=/hpux/onlinedocs/diag/st/str_0009.htm&searchterms=mpc_bindlwp&queryid=20030210-135524



위 사이트의 자료도 참고 하시기 바랍니다.