- Community Home
- >
- HPE Community, Korea
- >
- HP-UX
- >
- dmesg [질문]자료첨부 했는데 다시좀 봐주세여...2006/9/14
HP-UX
1753481
회원
3859
온라인
108794
솔루션
포럼
범주
Company
Local Language
뒤로
포럼
토론 게시판
포럼
- Data Protection and Retention
- Entry Storage Systems
- Legacy
- Midrange and Enterprise Storage
- Storage Networking
- HPE Nimble Storage
토론 게시판
토론 게시판
포럼
토론 게시판
뒤로
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
- BladeSystem Infrastructure and Application Solutions
- Appliance Servers
- Alpha Servers
- BackOffice Products
- Internet Products
- HPE 9000 and HPE e3000 Servers
- Networking
- Netservers
- Secure OS Software for Linux
- Server Management (Insight Manager 7)
- Windows Server 2003
- Operating System - Tru64 Unix
- ProLiant Deployment and Provisioning
- Linux-Based Community / Regional
- Microsoft System Center Integration
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
블로그
정보
커뮤니티 언어
언어
포럼
블로그
- 신규로 표시
- 북마크
- 구독
- 소거
- RSS 피드 구독
- 강조
- 인쇄
- 부적절한 컨텐트 신고
날짜: 09-08-2006 10:00 PM
날짜: 09-08-2006 10:00 PM
dmesg [질문]자료첨부 했는데 다시좀 봐주세여...2006/9/14
이태곤님 답변감사드립니다 ^^
작업하 하려니 잘안되네여;;
그래서 조언을 다시구하고자 자료 첨부했습니다
자료보시구 다시한번 하는 방법 자세히 알려주셨으면 감사하겠습니다.
많은 분들의 답변 기다리겠습니다...
좋은 하루보네세여^^
작업하 하려니 잘안되네여;;
그래서 조언을 다시구하고자 자료 첨부했습니다
자료보시구 다시한번 하는 방법 자세히 알려주셨으면 감사하겠습니다.
많은 분들의 답변 기다리겠습니다...
좋은 하루보네세여^^
2 응답 2
- 신규로 표시
- 북마크
- 구독
- 소거
- RSS 피드 구독
- 강조
- 인쇄
- 부적절한 컨텐트 신고
날짜: 09-09-2006 10:00 PM
날짜: 09-09-2006 10:00 PM
dmesg [질문]자료첨부 했는데 다시좀 봐주세여...2006/9/14
안녕하십니까
HBA카드나 Storage의 Controller 을 교체 하셨다면 서버을 재부팅하거나 nport ID을 replace 해주셔야 합니다.
먼저 0/0/12/1/0 가 어떤 HBA인지 확인하셔야 합니다. 여러 H/W path에서 메시지가 발생되는 것으로 보아 Storage의 Controller을 교체하신것 같은데 먼저 /dev/td 을 확인하셔야 합니다.
# ioscan -funCfc
0/0/12/1/0 가 가리키는 FC HBA을 /dev/td0 라 가정
# fcmsutil /dev/td0 devstat all | grep -e Nport -e Failed
# fcmsutil /dev/td0 replace_dsk 0x.. after exchange of a controller (0x.. = controller N_port ID)
# ioscan -f ; inef -e
=====
또는
# ioscan -fn ( NO_HW 가 있는지 확인)
NO_HW가 있다면 해당 디스크가 정상인지 확인합니다. 만약 필요없다며 rmsf 로 device 파일을 지우시면 됩니다.
참고로 다음 URL을 참고하십시오
http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=127156&admit=-682735245+1157763564915+28353475
http://www.1402.com/documents/Fibre%20Channel%20Mass%20Storage%20(FCMS).pdf#search=%22Unable%20to%20access%20previously%20accessed%20device%20at%20nport%20ID%20%22
HBA카드나 Storage의 Controller 을 교체 하셨다면 서버을 재부팅하거나 nport ID을 replace 해주셔야 합니다.
먼저 0/0/12/1/0 가 어떤 HBA인지 확인하셔야 합니다. 여러 H/W path에서 메시지가 발생되는 것으로 보아 Storage의 Controller을 교체하신것 같은데 먼저 /dev/td 을 확인하셔야 합니다.
# ioscan -funCfc
0/0/12/1/0 가 가리키는 FC HBA을 /dev/td0 라 가정
# fcmsutil /dev/td0 devstat all | grep -e Nport -e Failed
# fcmsutil /dev/td0 replace_dsk 0x.. after exchange of a controller (0x.. = controller N_port ID)
# ioscan -f ; inef -e
=====
또는
# ioscan -fn ( NO_HW 가 있는지 확인)
NO_HW가 있다면 해당 디스크가 정상인지 확인합니다. 만약 필요없다며 rmsf 로 device 파일을 지우시면 됩니다.
참고로 다음 URL을 참고하십시오
http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=127156&admit=-682735245+1157763564915+28353475
http://www.1402.com/documents/Fibre%20Channel%20Mass%20Storage%20(FCMS).pdf#search=%22Unable%20to%20access%20previously%20accessed%20device%20at%20nport%20ID%20%22
- 신규로 표시
- 북마크
- 구독
- 소거
- RSS 피드 구독
- 강조
- 인쇄
- 부적절한 컨텐트 신고
날짜: 09-14-2006 10:00 PM
날짜: 09-14-2006 10:00 PM
dmesg [질문]자료첨부 했는데 다시좀 봐주세여...2006/9/14
관련자료입니다.
TO REPLACE A F/C DISK CONNECTED ON A F/C INTERFACE
1- Have a look in dmesg :
#dmesg
Ex:
:
:
Logical volume 64, 0x3 configured as ROOT
Logical volume 64, 0x2 configured as SWAP
Logical volume 64, 0x2 configured as DUMP
Swap device table: (start & size given in 512-byte blocks)
entry 0 - major is 64, minor is 0x2; start = 0, size = 8388608
Dump device table: (start & size given in 1-Kbyte blocks)
entry 0 - major is 31, minor is 0x16000; start = 88928, size =4194304
:
:
Memory Information:
physical page size = 4096 bytes, logical page size = 4096 bytes
Physical: 4194304 Kbytes, lockable: 3602532 Kbytes, available: 3675116
:
:
SCSI: Attempt to access partially open device -- dev: bc0b2000
SCSI: Attempt to access partially open device -- dev: bc072000
0/4/0/0: Unable to access previously accessed device at nport ID 0x90.
0/4/0/0: Unable to access previously accessed device at nport ID 0x90.
1/10/0/0: Unable to access previously accessed device at nport ID 0x90.
1/10/0/0: Unable to access previously accessed device at nport ID 0x90.
In this exemple the failing disk is at nport ID 0x90
With a double attachment, primary and alternate : 0/4/0/0 and 1/10/0/0
2- If this info doesn’t appear in dmesg try to get it from syslog.log file
3- If the disk is in a FC10 enclosure: see: FC10 loop_Id / slot table
4- Change defective disk
5- Check in ioscan :
#ioscan -fn
Class I H/W Path Driver S/W State H/W Type Description
=================================================================================
:
:
fc 0 0/4/0/0 td CLAIMED INTERFACE HP Tachyon TL/TS Fibre Channel Mass Storage Adapter
/dev/td0
:
:
target 20 0/4/0/0.8.0.255.3.2 tgt NO_HW DEVICE
disk 85 0/4/0/0.8.0.255.3.2.0 sdisk NO_HW DEVICE SEAGATE ST318451FC
/dev/dsk/c11t2d0 /dev/rdsk/c11t2d0
:
:
fc 2 1/10/0/0 td CLAIMED INTERFACE HP Tachyon TL/TS Fibre Channel Mass Storage Adapter
/dev/td2
:
:
target 64 1/10/0/0.8.0.255.3.2 tgt NO_HW DEVICE
disk 65 1/10/0/0.8.0.255.3.2.0 sdisk NO_HW DEVICE SEAGATE ST318451FC
/dev/dsk/c7t2d0 /dev/rdsk/c7t2d0
In this exemple the disk still appears as NO_HW on both attachments
6- Replace it with fcmsutil on both attachments:
# fcmsutil /dev/tdx devstat all | grep Loop (to have the corresponding N_Port IDs and Loop IDs)
#/opt/fcms/bin/fcmsutil /dev/td0 replace_dsk 0x90 (N_Port ID)
Disk at nportid 0x000090(Loop_id 50) will not be authenticated
OR
#/opt/fcms/bin/fcmsutil /dev/td0 replace dsk -l 50 (Loop ID)
(N_port ID 0x90= Loop ID 50: see table for conversion)
#/opt/fcms/bin/fcmsutil /dev/td2 replace_dsk 0x90 (N_Port ID)
Disk at nportid 0x000090(Loop_id 50) will not be authenticated
OR
#/opt/fcms/bin/fcmsutil /dev/td2 replace dsk -l 50 (Loop ID)
(N_port ID 0x90= Loop ID 50: see table for conversion)
TO REPLACE A F/C DISK CONNECTED ON A F/C INTERFACE
1- Have a look in dmesg :
#dmesg
Ex:
:
:
Logical volume 64, 0x3 configured as ROOT
Logical volume 64, 0x2 configured as SWAP
Logical volume 64, 0x2 configured as DUMP
Swap device table: (start & size given in 512-byte blocks)
entry 0 - major is 64, minor is 0x2; start = 0, size = 8388608
Dump device table: (start & size given in 1-Kbyte blocks)
entry 0 - major is 31, minor is 0x16000; start = 88928, size =4194304
:
:
Memory Information:
physical page size = 4096 bytes, logical page size = 4096 bytes
Physical: 4194304 Kbytes, lockable: 3602532 Kbytes, available: 3675116
:
:
SCSI: Attempt to access partially open device -- dev: bc0b2000
SCSI: Attempt to access partially open device -- dev: bc072000
0/4/0/0: Unable to access previously accessed device at nport ID 0x90.
0/4/0/0: Unable to access previously accessed device at nport ID 0x90.
1/10/0/0: Unable to access previously accessed device at nport ID 0x90.
1/10/0/0: Unable to access previously accessed device at nport ID 0x90.
In this exemple the failing disk is at nport ID 0x90
With a double attachment, primary and alternate : 0/4/0/0 and 1/10/0/0
2- If this info doesn’t appear in dmesg try to get it from syslog.log file
3- If the disk is in a FC10 enclosure: see: FC10 loop_Id / slot table
4- Change defective disk
5- Check in ioscan :
#ioscan -fn
Class I H/W Path Driver S/W State H/W Type Description
=================================================================================
:
:
fc 0 0/4/0/0 td CLAIMED INTERFACE HP Tachyon TL/TS Fibre Channel Mass Storage Adapter
/dev/td0
:
:
target 20 0/4/0/0.8.0.255.3.2 tgt NO_HW DEVICE
disk 85 0/4/0/0.8.0.255.3.2.0 sdisk NO_HW DEVICE SEAGATE ST318451FC
/dev/dsk/c11t2d0 /dev/rdsk/c11t2d0
:
:
fc 2 1/10/0/0 td CLAIMED INTERFACE HP Tachyon TL/TS Fibre Channel Mass Storage Adapter
/dev/td2
:
:
target 64 1/10/0/0.8.0.255.3.2 tgt NO_HW DEVICE
disk 65 1/10/0/0.8.0.255.3.2.0 sdisk NO_HW DEVICE SEAGATE ST318451FC
/dev/dsk/c7t2d0 /dev/rdsk/c7t2d0
In this exemple the disk still appears as NO_HW on both attachments
6- Replace it with fcmsutil on both attachments:
# fcmsutil /dev/tdx devstat all | grep Loop (to have the corresponding N_Port IDs and Loop IDs)
#/opt/fcms/bin/fcmsutil /dev/td0 replace_dsk 0x90 (N_Port ID)
Disk at nportid 0x000090(Loop_id 50) will not be authenticated
OR
#/opt/fcms/bin/fcmsutil /dev/td0 replace dsk -l 50 (Loop ID)
(N_port ID 0x90= Loop ID 50: see table for conversion)
#/opt/fcms/bin/fcmsutil /dev/td2 replace_dsk 0x90 (N_Port ID)
Disk at nportid 0x000090(Loop_id 50) will not be authenticated
OR
#/opt/fcms/bin/fcmsutil /dev/td2 replace dsk -l 50 (Loop ID)
(N_port ID 0x90= Loop ID 50: see table for conversion)
위에 명시된 의견은 Hewlett Packard Enterprise가 아닌 저자의 개인 의견입니다. 이 사이트를 사용하면 이용 약관에 동의하게되며 참여 규칙 .
뉴스 및 이벤트
© Copyright 2024 Hewlett Packard Enterprise Development LP