HP-UX

event로그분석 부탁

 
권규용
정기 조언자

event로그분석 부탁

안녕하세요

syslog.log에 아래와 같은 message가 발생하였습니다.

말그대로 power supply를 인식하지 못해서 발생하는것 같은데요

mstm에서 어느 항목으로 확인을 해야하는지요?





May 26 08:55:41 unib2b02 EMS : ------ EMS Event Notification ------ Value: "CRITICAL (5)" for Resource: "/system/events/ia64_corehw/core_hw" (Threshold: >= " 3")

Execute the following command to obtain event details: /opt/resmon/bin/resdata -R 176750595 -r /system/events/ia64_corehw/core_hw -n 176750640 -a

unib2b02:/var/adm/syslog] /opt/resmon/bin/resdata -R 176750595 -r /system/events/ia64_corehw/core_hw -n 176750640 -a



CURRENT MONITOR DATA:



Event Time..........: Mon May 26 08:55:40 2008

Severity............: CRITICAL

Monitor.............: ia64_corehw

Event #.............: 104011

System..............: unib2b02



Summary:

Power Unit : Redundancy lost or not present.





Description of Error:



The number of Power supplies has gone from N+1 (redundant) to N

(non-redundant) if a Power supply was removed, or the number of Power

supplies is < N+1.



Probable Cause / Recommended Action:



The minimum number of power supplies required to power the unit is

currently installed and operating. There are no redundant I/O power

supplies available in case of failure. If redundancy is desired another

Power supply should be added.



For information on the sensor that generated this event, refer to FRU ID

in Event Details section.



Additional Event Data:

System IP Address...: 10.50.10.38

System IP Address...: 192.168.0.67

Event Id............: 0x4839fc7c00000000

Monitor Version.....: B.01.00

Event Class.........: System

Client Configuration File...........:

/var/stm/config/tools/monitor/default_ia64_corehw.clcfg

Client Configuration File Version...: A.01.00

Qualification criteria met.

Number of events..: 1

Associated OS error log entry id(s):

None

Additional System Data:

System Model Number.............: ia64 hp server rx4640

EMS Version.....................: A.04.20

STM Version.....................: C.58.00

System Serial Number............: SGH4720697

Latest information on this event:

http://docs.hp.com/hpux/content/hardware/ems/ia64_corehw.htm#104011



v-v-v-v-v-v-v-v-v-v-v-v-v D E T A I L S v-v-v-v-v-v-v-v-v-v-v-v-v





Event Details :



Event Date .............: Fri Feb 29 10:45:34 2008

Sensor Number ..........: 0xcf

Sensor Type ............: Power Unit

Sensor Class ...........: Sensor specific

Sensor Reading/Offset...: 0x02 (Sensor Reading)

Event Type.............: Not Applicable

Entity ID ..............: 21

Generic Message.........:

Power Unit : Power cycle

Entity FRU Id Info......:

power management / power distribution board (Sensor ID: Power Converter)

3 응답 3
김병수
본과생

event로그분석 부탁

cm prompt에서 ps 로 확인하시면 됩니다.



MP:CM>



** ps 정보에서 Power OK 부분에 * 확인



MP:CM> ps

Display detailed status of the selected MP bus device.



The following MP bus devices were found:



+---+----+----+-----+-----+-------+-----+



| | | | | | | |



| | |LAN\| Sys | | IO | |



|Cab| MP |SCSI|Bkpln|Cells|Chassis| BPS |



| # |M S|0 1| | 0 1 | 0 1 | 0 1 |



+---+----+----+-----+-----+-------+-----|



| 0 |* *|* *| * | * * | * * | * * |



+---+----+----+-----+-----+-------+-----+



그럼~~~
고재진
중학생

event로그분석 부탁

안녕하세요.



rx 서버에서는 mstm으로 정보가 많이 나오지 않습니다.



mp에서 ps 명령어로 확인하시는게 빠를것 같습니다.



그럼.
하봉구
조언자

event로그분석 부탁

rp 7420 같은 경우에 펌웨어 버전이 낮으면

저런 메세지를 뿌려주는 경우가 있던데

MP에서 확인해보시고

이상이 없으시면

펌웨어 버젼을 올려주셔야 될꺼같네욤 ^^;;