HP-UX
1748171 회원
3898 온라인
108758 솔루션
새 메시지

ignite 백업 로그 입니다.

 
천준호
조언자

ignite 백업 로그 입니다.

# more recovery.log











======= 03/29/08 22:59:38 KST Started ./make_tape_recovery. (Sat Mar 29



22:59:38 KST 2008)



@(#) Ignite-UX Revision B.3.7.95



@(#) net_recovery (opt) $Revision: 10.575.1.1 $











* Testing pax for needed patch



* Passed pax tests.



* Recovery Archive Description = Recovery Archive







* Recovery Archive Location = /dev/rmt/0mn







* Number of Archives to Save = 2











In? dsk/vg name minor# Associated disks/mountpoints



1 v /dev/vg00 0x00 /dev/dsk/c2t2d0 /dev/dsk/c1t2d0



/dev/vg00/lvol1 /stand 2



/dev/vg00/lvol10



/dev/vg00/lvol2



/dev/vg00/lvol9



/dev/vg00/lvol3 / 2



/dev/vg00/lvol4 /tmp 2



/dev/vg00/lvol5 /home 2



/dev/vg00/lvol6 /opt 2



/dev/vg00/lvol7 /usr 2



/dev/vg00/lvol8 /var 2



/dev/vg00/lvol11 /crash 0



/dev/vg00/lvol12 /app 0







** 0 - The Volume Group or Filesystem is Not included in the



System Recovery Archive



** 1 - The Volume Group or Filesystem is Partially included in the



System Recovery Archive



** 2 - The Volume Group or Filesystem is Fully included in the



System Recovery Archive







* Checking Versions of Ignite-UX filesets



* Creating System Configuration.



WARNING: The volume group /dev/vg00 will be only partially included in the



System Recovery Archive. This means that not all files and



directories on this volume group will be restored when the archive is



installed. This message can be suppressed using the "-P s" option for



make_tape_recovery. See make_tape_recovery(1M) for more details.







* /opt/ignite/bin/save_config -f



/var/opt/ignite/recovery/2008-03-29,22:59/system_cfg vg00



/opt/ignite/bin/save_config: getip: not found.



* Backing Up Volume Group /dev/vg00



* /usr/sbin/vgcfgbackup /dev/vg00



Volume Group configuration for /dev/vg00 has been saved in /etc/lvmconf/vg00.conf



* Creating Map Files for Volume Group /dev/vg00



* /usr/sbin/vgexport -p -m /etc/lvmconf/vg00.mapfile /dev/vg00



vgexport: Volume group "/dev/vg00" is still active.







* Creating Control Configuration.



* Creating Archive File List



* Creating Archive Configuration







* /opt/ignite/bin/make_arch_config -c



/var/opt/ignite/recovery/2008-03-29,22:59/archive_cfg -g



/var/opt/ignite/recovery/2008-03-29,22:59/flist -n 2008-03-29,22:59 -r



64 -d Recovery\ Archive -t -i 1



* Saving the information about archive to



/var/opt/ignite/recovery/previews



* Creating The Tape Archive



* Checking configuration file for Syntax



* Writing boot LIF to tape



39418+1 records in



39418+1 records out



* Complete writing boot LIF onto tape.



* /opt/ignite/data/scripts/make_sys_image -c n -d /dev/rmt/0mn -t n -s



local -n 2008-03-29,22:59 -m t -w



/var/opt/ignite/recovery/2008-03-29,22:59/recovery.log -u -R -g



/var/opt/ignite/recovery/2008-03-29,22:59/flist -a 3868190







* Preparing to create a system archive







* Archiving contents of Foodapp via tar image to local device/dev/rmt/0mn.



* Creation of system archive complete



NOTE: The following files are in the list of files that were on the



system, but they are no longer present. These files are not



included in the back-up:



/whain/stale.sh



/var/tmp/ign_configure/make_sys_image.log







NOTE: Could not read the /etc/resolv.conf file.



* Cleaning up old configuration file directories











======= 03/29/08 23:44:40 KST make_tape_recovery completed with warnings



백업은 정상적으로 끝났습니다.



그런데 워닝 메세지가 올라오고 다른때보다 백업이 좀 일찍 받아 졌습니다.



이상이 없는건지 확인좀 부탁 드리겠습니다.
2 응답 2
김병수
본과생

ignite 백업 로그 입니다.

warning message가 나왔지만..



backup은 정상적으로 끝났네요.



ingite bakcup시에 completed가 중요합니다.



걱정하지 않나도 될듯합니다.



그럼~~
이태곤
중학생

ignite 백업 로그 입니다.

안녕하십니까



/etc/resolv.conf file이 없으서 생긴 Warning이니 무시하셔도 될것 같습니다.



그리고 추가 검증이 필요하면 다음 명령어로 점검해보시면 됩니다.



# mt fsf 1

# tar tvf /dev/rmt/0mn



추가로 ignite 버전이 많이 낮은것 같습니다. upgrade하시는 것이 좋을듯합니다.