HP-UX

make_recovry중에 다음과 같은 로그가 생기고 백업이 안됩니다.

 
이현우_1
임시 수집가

make_recovry중에 다음과 같은 로그가 생기고 백업이 안됩니다.

다음과 같은 메세지가 나오는 이유가 무엇이며?

백업을 하기위해서 해야할일은 무엇입니까??



Saads ksrv4 root:make_recovery -ACv -d /dev/rmt/4m

Option -A specified. Entire Core Volume Group/disk Will be backed up.





**********************************************

HP-UX System Recovery

Validating append file

Done



File Systems on Core OS Disks/Volume Groups:



vg name = vg00

pv_name = /dev/dsk/c1t6d0

pv_name = /dev/dsk/c1t6d0



vg00 /dev/vg00/lvol3 /

vg00 /dev/vg00/lvol10 /baselines

vg00 /dev/vg00/lvol4 /opt

vg00 /dev/vg00/lvol1 /stand

vg00 /dev/vg00/lvol5 /tmp

vg00 /dev/vg00/lvol6 /usr

vg00 /dev/vg00/lvol8 /var

vg00 /dev/vg00/lvol9 /var/tmp



Create mount points

/export

/home

/ksrv4_sim

/ksrv4_psd

/apl1

/apl2

/build



/opt is a mounted directory

It is in the Core Volume Group

Mounted at /dev/vg00/lvol4



/var is a mounted directory

It is in the Core volume Group

Mounted at /dev/vg00/lvol8



Destination = /dev/rmt/4m

Boot LIF location = /var/tmp/uxinstlf.recovery



*******************************************

Creating the configuration file.

make_recovery(390) : Call to /opt/ignite/bin/save_config failed.

Check the /var/opt/ignite/logs/makrec.log1 file.

Cleanup

2 응답 2
고광태
중학생

make_recovry중에 다음과 같은 로그가 생기고 백업이 안됩니다.

이문제는 아래의 과정을 참고해보세요~



1. save_config 명령어를 실행



/opt/ignite/bin/save_config -f



Note: This command gives more detailed error information:



save_config: error - unknown disk type for /dev/vg00/lvol3,

not SCSI or HPFL



save_config: error - cannot determine primary swap size



You see the same error for lvol4.



2. Execute the bdf command to identify the lvol3 and lvol4

mount points.



Note: Root ( / ) is normally mounted at /dev/vg00/lvol3,

and /opt is mounted at /dev/vg00/lvol4.



Perform the following steps if / and /opt are not properly

mounted:



- mv /etc/mnttab /etc/mnttab.old

- mount -a



3. Execute the bdf command.



Note: bdf should now show the lvols mounted as /etc/fstab

has them, and the make_recovery should work as expected.

김병수
본과생

make_recovry중에 다음과 같은 로그가 생기고 백업이 안됩니다.

/opt/ignite/bin/save_config file이 실행권한 인지를 확인하시구요.



# vi save_config

set -x



save_config file은 script file입니다.



set -x 를 삽입후에 어디서 장애가 발생하는지 확인하시기 바랍니다.



그럼~~