make_tape_recovery 장애 다시 문의드립니다.

[서동진_2]

WARNING: You are about to create an Itanium-based recovery tape. If this

system does NOT support direct tape boot, you will need to perform

"two-step media recovery" where the boot media (CD or DVD) has the

same version of Ignite-UX as the version on this tape.

NOTE: File: /var/tmp/tmp_cfg_file is not world-readable, this may cause

clients to fail to read it during an installation.

NOTE: File: /tmp/cfg is not world-readable, this may cause clients to fail

to read it during an installation.

NOTE: File: /var/tmp/IINSTALLFS is not world-readable, this may cause

clients to fail to read it during an installation.

* Complete writing boot LIF onto tape.

* /opt/ignite/data/scripts/make_sys_image -c n -d /dev/rmt/0mn -t n -s

local -n 2009-03-05,07:27 -m t -w

/var/opt/ignite/recovery/2009-03-05,07:27/recovery.log -u -R -g

/var/opt/ignite/recovery/2009-03-05,07:27/flist -a 16668500



* Preparing to create a system archive.



* Archiving contents of imageapp via tar image to local device /dev/rmt/0mn.

pax: write : I/O error

pax: A write error has occurred.

WARNING: The pax command returned a non-zero exit status (exit status 1).

ERROR: The find_files command failed (exit status 141).



ERROR: The make_sys_image command failed. The system recovery archive will

not be created.



======= 03/05/09 08:23:32 KST make_tape_recovery completed unsuccessfully

[이태곤]

안녕하십니까



우선 tape device가 정상인지 확인후 다시 해보십시오

# ioscan -funC tape 으로 tape device 확인



# tar cvf /dev/rmt/0m /tmp

# tar tvf /dev/rmt/0m



정상이라면 make_tape_recovery 도 정상적으로 될것입니다.

만약 안되시면 ignite을 최신의 것으로 재 설치해보십시오



tar도 안되시면 tape device나 tape에 문제가 있을것 같습니다.