HP-UX
1748142 회원
3538 온라인
108758 솔루션
새 메시지

mstm [질문]입니다

 
박선호_1
임시 조언자

mstm [질문]입니다

unix B.11.23 U 9000/800 rp8420 TZ=KST-9

#swlist |grep -i online

OnlineDiag B.11.23.07.04 HPUX 11.23 Support Tools Bundle,Jun 2006



#mstm 하면 밑에 메시지뜨고 안되네여;;



Running Command File

Running Command File (/usr/sbin/stm/ui/config/.stmrc).





Obtaining Host Information

Waiting to obtain host information from the local host dwpro.

The diagnostic daemon "diagmond" may have been started recently and is busy

building the device map.



If this message persists for a long time, it is possible that either the

diagnostic daemon is not running, or that networking is improperly configured.

The networking configuration can be verified by comparing 'nslookup `hostname`'

with the output of ifconfig of the LANs identified by lanscan.



If you cancel this message, the User Interface (UI) will not automatically

connect to a Unit Under Test (UUT). It will be necessary to use the Select

Current System command in the System menu to attach the UI to a UUT.



문제가 뭔지 알려주세여 빠른답변 기다리 겠습니다

오늘도 좋은 하루보네세여

미리 감사 드립니다^^
8 응답 8
김병수
본과생

mstm [질문]입니다

우선 daemon을 확인하시기 바랍니다.



# ps -ef |grep diag



# /sbin/init.d/diagnostic stop



# /sbin/init.d/diagnostic start



mstm 관련 daemon이 start 되어 있지 않아 생기는 문제입니다.



그럼~~~
박선호_1
임시 조언자

mstm [질문]입니다

dwpro:/>ps -ef |grep diag

root 1084 1065 0 13:58:44 pts/ta 0:00 grep diag

root 1033 1 0 13:55:14 ? 0:00 /usr/sbin/stm/uut/bin/sys/diagmo

nd



/sbin/init.d/diagnostic stop

/sbin/init.d/diagnostic start

말씀하신데로 데몬 확인 해서 stop , start 했는데도 똑같은 메시지 뜨고 mstm 실행인 안되네여;;



김병수님 다시한번 알려주세여 이상합니다...

김병수
본과생

mstm [질문]입니다

우선 관련된 daemon은 2개입니다.



#ps -ef|grep diag



diaglogd 와 diagmond 입니다.



2개의 daemon이 /sbin/init.d/diagnostic start하면 실행됩니다.



현재 daemon이 2개가 running되어 있는지 확인하시기 바랍니다.



그럼~~~
박선호_1
임시 조언자

mstm [질문]입니다

김병수님 계속해서 빠른 답변 감사드립니다^^



/usr/sbin/stm/uut/bin/sys/diagmond



diagmond 이거 한개만 런닝되어 있는 상태 입니다.
김병수
본과생

mstm [질문]입니다

daemon이 start되지 않아 발생되는 문제입니다.



mstm의 package를 http://www.software.hp.com에서 download하신후에



upgrade하여 보시기 바랍니다.



upgrade를 하기전에는 반드시



# /sbin/init.d/diagnostic stop



한후에 작업하시기 바랍니다.



그럼~~~
박선호_1
임시 조언자

mstm [질문]입니다

한번더 질문하겠습니다;;



다운로해서 업그레드하면 서버 리부팅해줘야 하나여?









바쁘신데 도와주세서 감사했습니다^^

수고하세여
고재진
중학생

mstm [질문]입니다

안녕하세요..

음 제가 보기에는 부팅하고 얼마 안되서 실행시키신거 아닌가요?

좀더 시간을 두고나서 실행시키시면 될것같습니다.
김병수
본과생

mstm [질문]입니다

rebooing은 하지 않습니다.



그럼~~