Skip to ContentSkip to Footer
시작 내용
- Community Home
- >
- HPE Community, Korea
- >
- HP-UX
- >
- mstm [질문]입니다
HP-UX
-
- Forums
-
- Advancing Life & Work
- Advantage EX
- Alliances
- Around the Storage Block
- HPE Ezmeral: Uncut
- OEM Solutions
- Servers & Systems: The Right Compute
- Tech Insights
- The Cloud Experience Everywhere
- HPE Blog, Austria, Germany & Switzerland
- Blog HPE, France
- HPE Blog, Italy
- HPE Blog, Japan
- HPE Blog, Middle East
- HPE Blog, Latin America
- HPE Blog, Russia
- HPE Blog, Saudi Arabia
- HPE Blog, South Africa
- HPE Blog, UK & Ireland
-
Blogs
-
정보
- 커뮤니티
- Welcome
- 시작하기
- 포럼 FAQ
- 랭킹 개요
- 참여규칙
- Tips and Tricks
- 접촉
- Announcements
- Email us
- Feedback
- Information Libraries
- Integrated Systems
- Networking
- Servers
- Storage
- 다른 HPE 사이트
- Support Center
- Aruba Airheads Community
- Enterprise.nxt
- HPE Dev Community
- Cloud28+ Community
- Marketplace
-
포럼
-
블로그
-
정보
-
한국어
- 신규로 표시
- 북마크
- 구독
- 소거
- RSS 피드 구독
- 강조
- 인쇄
- 친구에게 이메일 보내기
- 부적절한 컨텐트 신고
날짜: 10-24-2006 10:00 PM
날짜: 10-24-2006 10:00 PM
mstm [질문]입니다
unix B.11.23 U 9000/800 rp8420 TZ=KST-9
#swlist |grep -i online
OnlineDiag B.11.23.07.04 HPUX 11.23 Support Tools Bundle,Jun 2006
#mstm 하면 밑에 메시지뜨고 안되네여;;
Running Command File
Running Command File (/usr/sbin/stm/ui/config/.stmrc).
Obtaining Host Information
Waiting to obtain host information from the local host dwpro.
The diagnostic daemon "diagmond" may have been started recently and is busy
building the device map.
If this message persists for a long time, it is possible that either the
diagnostic daemon is not running, or that networking is improperly configured.
The networking configuration can be verified by comparing 'nslookup `hostname`'
with the output of ifconfig of the LANs identified by lanscan.
If you cancel this message, the User Interface (UI) will not automatically
connect to a Unit Under Test (UUT). It will be necessary to use the Select
Current System command in the System menu to attach the UI to a UUT.
문제가 뭔지 알려주세여 빠른답변 기다리 겠습니다
오늘도 좋은 하루보네세여
미리 감사 드립니다^^
#swlist |grep -i online
OnlineDiag B.11.23.07.04 HPUX 11.23 Support Tools Bundle,Jun 2006
#mstm 하면 밑에 메시지뜨고 안되네여;;
Running Command File
Running Command File (/usr/sbin/stm/ui/config/.stmrc).
Obtaining Host Information
Waiting to obtain host information from the local host dwpro.
The diagnostic daemon "diagmond" may have been started recently and is busy
building the device map.
If this message persists for a long time, it is possible that either the
diagnostic daemon is not running, or that networking is improperly configured.
The networking configuration can be verified by comparing 'nslookup `hostname`'
with the output of ifconfig of the LANs identified by lanscan.
If you cancel this message, the User Interface (UI) will not automatically
connect to a Unit Under Test (UUT). It will be necessary to use the Select
Current System command in the System menu to attach the UI to a UUT.
문제가 뭔지 알려주세여 빠른답변 기다리 겠습니다
오늘도 좋은 하루보네세여
미리 감사 드립니다^^
8 응답 8
- 신규로 표시
- 북마크
- 구독
- 소거
- RSS 피드 구독
- 강조
- 인쇄
- 친구에게 이메일 보내기
- 부적절한 컨텐트 신고
날짜: 10-24-2006 10:00 PM
날짜: 10-24-2006 10:00 PM
mstm [질문]입니다
dwpro:/>ps -ef |grep diag
root 1084 1065 0 13:58:44 pts/ta 0:00 grep diag
root 1033 1 0 13:55:14 ? 0:00 /usr/sbin/stm/uut/bin/sys/diagmo
nd
/sbin/init.d/diagnostic stop
/sbin/init.d/diagnostic start
말씀하신데로 데몬 확인 해서 stop , start 했는데도 똑같은 메시지 뜨고 mstm 실행인 안되네여;;
김병수님 다시한번 알려주세여 이상합니다...
root 1084 1065 0 13:58:44 pts/ta 0:00 grep diag
root 1033 1 0 13:55:14 ? 0:00 /usr/sbin/stm/uut/bin/sys/diagmo
nd
/sbin/init.d/diagnostic stop
/sbin/init.d/diagnostic start
말씀하신데로 데몬 확인 해서 stop , start 했는데도 똑같은 메시지 뜨고 mstm 실행인 안되네여;;
김병수님 다시한번 알려주세여 이상합니다...
- 신규로 표시
- 북마크
- 구독
- 소거
- RSS 피드 구독
- 강조
- 인쇄
- 친구에게 이메일 보내기
- 부적절한 컨텐트 신고
날짜: 10-24-2006 10:00 PM
날짜: 10-24-2006 10:00 PM
mstm [질문]입니다
daemon이 start되지 않아 발생되는 문제입니다.
mstm의 package를 http://www.software.hp.com에서 download하신후에
upgrade하여 보시기 바랍니다.
upgrade를 하기전에는 반드시
# /sbin/init.d/diagnostic stop
한후에 작업하시기 바랍니다.
그럼~~~
mstm의 package를 http://www.software.hp.com에서 download하신후에
upgrade하여 보시기 바랍니다.
upgrade를 하기전에는 반드시
# /sbin/init.d/diagnostic stop
한후에 작업하시기 바랍니다.
그럼~~~
위에 명시된 의견은 Hewlett Packard Enterprise가 아닌 저자의 개인 의견입니다. 이 사이트를 사용하면 이용 약관에 동의하게되며 참여 규칙 .