타임아웃때문에 인터벌을 늘리라고하는것같은데...
이 메세지가 나는 이유가 뭐죠?
그리고 어떤 역할은 하는거죠??
02:09:42 Note: calculation delayed due to counter wrap for fibresw2 Received-ei0.1.
02:09:42 Note: calculation delayed due to counter wrap for fibresw2 Transmitted-ei0.1.
09/07/05 01:55:26 An SNMP request for "fibresw2 Received-ei0.1" is already in progress at
polling time. Deferring one collection. This may be due to SNMP
timing out because the agent is not responding or your polling
interval is set too small. The SNMP configuration for fibresw2
is timeout 6.0 seconds with 2 retries which may take
42.0 seconds total for SNMP to timeout. The polling interval
is 10 seconds. You should increase the polling interval.
09/07/05 01:55:26 An SNMP request for "fibresw2 Transmitted-ei0.1" is already in progress at
polling time. Deferring one collection. This may be due to SNMP
timing out because the agent is not responding or your polling
interval is set too small. The SNMP configuration for fibresw2
is timeout 6.0 seconds with 2 retries which may take
42.0 seconds total for SNMP to timeout. The polling interval
is 10 seconds. You should increase the polling interval.
09/07/05 01:55:58 SNMP timeout #1 for fibresw2 Received-ei0.1.
09/07/05 01:55:58 SNMP timeout #1 for fibresw2 Transmitted-ei0.1.
09/07/05 01:56:48 SNMP timeout #2 for fibresw2 Received-ei0.1.
09/07/05 01:56:48 SNMP timeout #2 for fibresw2 Transmitted-ei0.1.
09/07/05 01:57:38 SNMP timeout #3 for fibresw2 Received-ei0.1.
09/07/05 01:57:38 fibresw2 Received-ei0.1 had 3 consecutive timeouts. Stopping SNMP.
09/07/05 01:57:38 SNMP timeout #3 for fibresw2 Transmitted-ei0.1.
09/07/05 01:57:38 fibresw2 Transmitted-ei0.1 had 3 consecutive timeouts. Stopping SNMP.
09/07/05 01:57:46 No SNMP response from specified nodes. No live SNMP performed.
~
~
