HP-UX

rx4640 firmware upgrade에 관한 질문입니다

 
han jin woong
조언자

rx4640 firmware upgrade에 관한 질문입니다

Model : rx4640

OS : 11.23

Firmware info

Firmware revision : 02.13

BMC version :v02.37



patch PHSS_30422 로 Firmware를 업그레이드하려고 하는데

02.29로 되어있어야 한다면서 계속 swinstall Error가 발생됩니다.



NOTE: This patch PHSS_34022 cannot be installed on the machine

having MP firmware version less than E.02.29

Please upgrade the MP firmware to E.02.29 before

installing this patch.

PHSS_34022 will be excluded from installation.



혹 swinstall이나 tape booting말고 다른 방법이 있는지요..

QPK patch는 2006년 version으로 되어있읍니다.

그럼 수고하시고 답변 부탁드리겠읍니다.
2 응답 2
김병수
본과생

rx4640 firmware upgrade에 관한 질문입니다

위의 patch를 적용하기전에 PHSS_30680을 하시기 바랍니다.

PHSS_30680:

The following features appear in MP firmware revision

E.02.29:



PHSS_30680이 E.02.29입니다.



그럼~~
이태곤
중학생

rx4640 firmware upgrade에 관한 질문입니다

안녕하십니까



itanium 서버의 firmware을 올리는 방법은 3가지 정도 있습니다.



1. EFI image 사용

2. ISO image 사용

3. Depot 파일 사용



이중 3번의 Depot 파일 사용은 일반 패치하는것처럼 하는 가장 쉬운 방법입니다.(사전에 최신의 Online Diagnostic 설치권고)



1번 EFI image 사용은 수동으로 비교적 많은 명령어을 입력해야 하나 HP-UX가 아닌 다른 OS에서도 사용이 가능합니다.



Installation Instructions:

HP-UX - Loading Firmware files onto EFI partition

1. You may need superuser privileges. Download "PF_CDIABSYS0317AEFI.tar.gz" and then FTP to an empty directory on the server requiring the firmware update.

2. Use 'gunzip' to unzip the file:

#gunzip PF_CDIABSYS0317AEFI.tar.gz

3. Use the 'tar' command to extract the firmware files - "sysupdate.efi", "update_SFW.efi", "lsiscsi.rom", and "efi8xxfl.efi":

#tar -xvf PF_CDIABSYS0317AEFI.tar

4. Determine the character-special device file for the EFI partition on your disk. Type: "ioscan -fknC disk". The file will be /dev/rdsk/*s1. (i.e. /dev/rdsk/c2t1d0s1) If there are more than one such file, check "bdf" output to identify the name of the disk associated with the root "/" directory.

For more information, type "man vgdisplay" and "man 4 efi".

#bdf

Filesystem kbytes used avail %used Mounted on

/dev/vg00/lvol3 409600 191592 216336 47% /

/dev/vg00/lvol1 311296 69296 240160 22% /stand

/dev/vg00/lvol8 2613248 1087200 1515664 42% /var

/dev/vg00/lvol7 4390912 2515064 1861224 57% /usr

/dev/vg00/lvol4 204800 8544 194728 4% /tmp

/dev/vg00/lvol6 3465216 1982064 1471600 57% /opt

/dev/vg00/lvol5 24576 8432 16032 34% /home

In the above output, the disk would be lvol3. Do a lvdisplay command:

#lvdisplay -v /dev/vg00/lvol3 |more

--- Distribution of logical volume ---

PV Name LE on PV PE on PV

/dev/dsk/c2t1d0s2 50 50

Note the device file of the disk. In this example it would be c2t1d0.

5. Type the following command to copy the "sysupdate.efi" firmware file to the EFI partition using the character-special device file determined in step 4 in place of 'c2t1d0':

"/usr/sbin/efi_cp -d/dev/rdsk/c(whatever)s1 sysupdate.efi /efi/hp/firmware/sysupdate.efi"

6. Type the following command to copy the "update_SFW.efi" file to EFI:

"/usr/sbin/efi_cp -d/dev/rdsk/c(whatever)s1 update_SFW.efi /efi/hp/firmware/update_SFW.efi"

7. Type the following command to copy the "lsiscsi.rom" file to EFI:

"/usr/sbin/efi_cp -d/dev/rdsk/c(whatever)s1 lsiscsi.rom /efi/hp/firmware/lsiscsi.rom"

8. Type the following command to copy the "efi8xxfl.efi" file to EFI:

"/usr/sbin/efi_cp -d/dev/rdsk/c(whatever)s1 efi8xxfl.efi /efi/hp/firmware/efi8xxfl.efi"

9. Verify the file was successfully copied to the EFI partition using the following command:

"/usr/sbin/efi_ls -d /dev/rdsk/c2t1d0s1 /efi/hp/firmware"

10. Type: "/usr/sbin/shutdown -ry now" to reboot the system to "EFI Boot Manager".

11. When the "EFI Boot Manager" menu appears, use the arrow keys to highlight the entry "EFI Shell ", then press ENTER to select it. The selection must be made within the timeout period displayed on the screen.

12. The "Device mapping table" will be displayed.

13. Proceed to "OS Independent - Updating Firmware from EFI Shell", shown below.





2번 ISO 파일사용은 파일을 다운로드 받은후 CD로 구운 다음 CD로 부팅하여 하는 방법입니다.



INSTALLATION INSTRUCTIONS:

Please review all instructions and the "Hewlett-Packard Support Tool License Terms" or your Hewlett-Packard support terms and conditions for precautions, scope of license, restrictions, and, limitation of liability and warranties, before installing this patch. It is important that you read and understand these instructions completely before you begin. This can determine your success in completing the Firmware update.

Prior to Installation:

Clear the system event logs.

1. Establish a telnet session with the iLO Management Processor.

2. Logon to the iLO Management Processor using the Admin password.

3. Type SL to enter the Show Logs menu.

4. At the "Enter menu item or to Quit:" prompt, type "c".

5. At the "Are you sure you want to clear all logs? (Y/):" prompt, type "y".

6. The following should be displayed:

-> Logs have been cleared.

Creating a CDROM Boot Option.

1. Boot the system to the EFI Boot Manager.

2. Select the "Boot Option Maintenance Menu".

3. Select the "Add a Boot Option".

4. Select the "Removable Media Boot" from the list.

5. Enter a descriptive name for the CDROM boot option.

6. Enter BootOption Data, type "a".

7. Enter BootOption Data, Enter a descriptive title for the boot option.

8. Save to NVRAM, type "y".

9. Exit the EFI Boot Maintenance Manager.

10. Proceed to "Installing Firmware from CDROM".

Installation Instructions:

Installing Firmware from CDROM.

1. Download PF_CDIABSYS0317A.zip to a PC with a CDROM burner and software installed.

2. Unzip PF_CDIABSYS0317A.zip.

3. Double Click the icon for PF_CDIABSYS0317A.iso or Right Click the icon for PF_CDIABSYS0317A.iso and select 'Record to CD' from the pop-up menu. Consult the operating instructions for your CD Burner software to complete the recording process. Many software packages only require clicking the 'okay' or similar button.

4. Remove the CD from the burner and install in the system to be updated.

5. Boot the system using the CDROM as the boot media.

NOTE: Do not boot to the EFI Shell prior to booting to the CDROM. Doing so may cause the U160 SCSI EFI Boot Services Driver update to fail to update during execution. If this is the case, a reset of the server is required prior to booting the CDROM.

6. If an "Internal Bootable DVD has been added" message appears, your system did not already have a removable media boot option required by HPOFM (HP Offline Firmware Manager); read the message, then press Enter to close it.

7. Press Enter to close the HPOFM welcome message.

8. Use the arrow keys to select the 'Manage Firmware' option, then press Enter. The Manage Firmware screen appears.

9. To select the device(s) to update, press Tab until the cursor moves to the device window. Use the arrow keys to highlight the desired device, then press Enter to select. An indicates the device is now selected for updating.

10. To read a firmware release note, highlight the desired device, then press the Spacebar to display the release note. When finished reading, press Tab to select 'Back', then press Enter to close the note.

11. Read any warning message(s), and press Enter to close them.

12. Press Tab to move the cursor to the 'Begin update' option at the bottom of the screen, then press Enter.

13. Read any reboot warning, then press Tab to move the cursor to the 'Continue' choice, then press Enter.

14. The firmware update will now begin. When the firmware update is complete, the system may reset. Be sure to leave the same CDROM in the drive.

15. HPOFM will run again.

16. When all updates have completed, HPOFM will display a results screen. Read the results, then press Enter to close the screen.

17. When the HPOFM welcome message again appears, press Enter to close it.

18. Select the 'Exit' option and press Enter to exit the HPOFM tool.



=====

firmware 파일은 아래 url에서 구하시면 됩니다.

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=346361&prodTypeId=15351&prodSeriesId=346359&swLang=13&taskId=135&swEnvOID=7#930



그럼 좋은하루되십시오