HP-UX
1753604 회원
6363 온라인
108797 솔루션
새 메시지

swinstall 시 장애로그입니다. 확인부탁드려요

 
Woo Sangdon
임시 조언자

swinstall 시 장애로그입니다. 확인부탁드려요

The software "qt,r=3.0.5,a=HP-UX_B.11.00_700/800,v=" was successfully

marked, but it depends on the following software items which could

not be found in the source. However, these items may already be in

the target. This will be checked during the Analysis Phase:

Mesa.Mesa-RUN gcc.gcc-SHLIBS

=====================================================================

이 에러가 떠서 Mesa와 GCC를 깔았는데도 똑같은 에러가 뜹니다.



/var/adm/sw/swagent.log 을 보면







04/30/04 18:01:11 KST BEGIN install AGENT SESSION (pid=5768)

(jobid=pshell-0120)



* Agent session started for user "root@pshell.postech.ac.kr".

(pid=5768)



* Beginning Analysis Phase.

* Source:

pshell.postech.ac.kr:/tmp/qt/qt-3.0.5-sd-11.00.depot

* Target: pshell:/

* Target logfile: pshell:/var/adm/sw/swagent.log

* Reading source for product information.

* Reading source for file information.

The corequisite "gcc.gcc-SHLIBS" for fileset

"qt.qt-RUN,r=3.0.5" cannot be successfully resolved. ^

ERROR: The dependencies for fileset "qt.qt-RUN,r=3.0.5" cannot be

resolved (see previous lines).

You must resolve the above dependencies before operating on

this fileset or change the "enforce_dependencies" option to

"false".

* Executing preDSA command.



* Summary of Analysis Phase:

ERROR: Exclude qt.qt-RUN,r=3.0.5

ERROR: 1 of 1 filesets had Errors.

ERROR: The Analysis Phase had errors. See the above output for

details.

2 응답 2
김병수
본과생

swinstall 시 장애로그입니다. 확인부탁드려요

# swinstall -x enforce_dependencies=false -s /tmp/qt/qt-3.0.5-sd-11.00.depot



이렇게 하여 보시기 바랍니다.



package dependencies로 인하여 발생되는 문제입니다.



또는 # swinstall -s /tmp/qt/qt-3.0.5-sd-11.00.depot

하여

options의 change option에서 dependencies를 mark하시기 바랍니다.



그럼~~

고광태
중학생

swinstall 시 장애로그입니다. 확인부탁드려요

http://hpux.connect.org.uk/hppd/hpux/Development/Libraries/qt-3.0.5/



위 사이트에서 다운로드 받으셨나요?

현재 가지고 계신 파일이 binary code 인것 같은데요..



source code 를 다운 로드 받으셔서 가지고 계신 gcc 나 anci C 로 다시 컴파일 하셔서 인스톨 하시는것도 방법일듯하네요..



그럼 참고하시길..