BladeSystem Forums have moved here
To make BladeSystem information easier to find, we have moved the BladeSystem forums here, to Servers and Operating Systems.
HP e3000
Showing results for 
Search instead for 
Do you mean 

HP 3000/939K/ 020 - How can config hardware parameters of its Lan Card

SOLVED
Go to Solution
Highlighted
Frequent Advisor

HP 3000/939K/ 020 - How can config hardware parameters of its Lan Card

How can I configure the server lan card?
I need to know if I can modify parameters like Flow Control (Full, Half...).
I don't know if I can do this.
I understand that I can configure MPE settings of this LAN Card with NMMGR but not hardware settings.

I need to know if I can modify this parameters and how can I do it.

Thanks
KARL
5 REPLIES
Honored Contributor

Re: HP 3000/939K/ 020 - How can config hardware parameters of its Lan Card

Idoubt that any 3K NIC has flow-control, unless there was a 1Gbit NIC at the end there. Otherwise, autoneg on the 100BT NICs was generally pretty good, so hardcoding settings shouldn't be necessary.

If the system is a "K" class then the core I/O was 10 Mbit/s half-duplex only classic Ethernet anyway, so nothing to set there.
there is no rest for the wicked yet the virtuous have no pillows
Frequent Advisor

Re: HP 3000/939K/ 020 - How can config hardware parameters of its Lan Card

Ok
Is there some command to read NIC configuration.
I know that I can't change this configuration but, how can I read it?
I want to know how my target is configured.
I need this information like Flow Control.

With SYSGEN is possible, or NMMGR?
Honored Contributor

Re: HP 3000/939K/ 020 - How can config hardware parameters of its Lan Card

Sorry, I'm too long removed from day-to-day MPE/XL (shows how long ago I last was involved :) to recall the specifics of how one checks.
there is no rest for the wicked yet the virtuous have no pillows
Frequent Advisor

Re: HP 3000/939K/ 020 - How can config hardware parameters of its Lan Card

Yes, I will read a little text about MPE but I have not never used it.
I will try it.
Frequent Advisor

Re: HP 3000/939K/ 020 - How can config hardware parameters of its Lan Card

THANK YOU.