3PAR- 7200c disk issue

[Dsinghp2002]

Dear Team,

I am getting  error during disk replacmement.

[sbhat09]

Hello @Dsinghp2002,

Can you please provide more details about the error you are getting?

What was the task you were doing? at what stage the error came? what is the error?

Regards,
Srinivas Bhat

If you feel this was helpful please click the KUDOS! thumb below!
Note: All of my comments are my own and are not any official representation of HPE.

[Dsinghp2002]

Dear Srinivas,

I have collected screenshot of that issue but i am unable to upload here due to permission denied.

Please share your email address so i can share with you same. 

[Cali]

Then give us the Output of the CLI (Putty, SSH):

servicemag status -d

admithw

checkhealth -detail

Cali

[sbhat09]

Hello @Dsinghp2002,

Below is the procedure to attach images to your post:

Save the image locally on your system.
While you are drafting a post, click on the camera icon.
Click on choose file
Browse to the location where saved the file on your system.
Select the file and click on open.
On the next page, click on 'DONE'.
You will the image as a part of your post.

Hope you will find it useful!

Or you can email me as well. I have PM'd you my email id.

Also please send the command outputs @Cali has requested.

Regards,
Srinivas Bhat

If you feel this was helpful please click the KUDOS! thumb below!
Note: All of my comments are my own and are not any official representation of HPE.

[Dsinghp2002]

Dear Team,

Please find below screenshot for reference.

[sbhat09]

Hello @Dsinghp2002,

Thanks for the command outputs. Please share the command output for 'admithw -checkonly'

Regards,
Srinivas Bhat

If you feel this was helpful please click the KUDOS! thumb below!
Note: All of my comments are my own and are not any official representation of HPE.

[sbhat09]

Hi @Dsinghp2002,

Have you tried 'admitpd <WWN>' ?

Regards,
Srinivas Bhat

If you feel this was helpful please click the KUDOS! thumb below!
Note: All of my comments are my own and are not any official representation of HPE.

[Dsinghp2002]

Please find below requsted output..

[sbhat09]

Hello @Dsinghp2002,

Same PD took 2 PD ids. Please follow the below

Please remove the PD
Run 'showpd -i' to ensure the PD is not showing up in the list.
Reseat the PD in the same slot.
Then try to admit the PD with 'admitpd <WWN>'
If you are getting the same issue again, please insert the PD in another slot (may be 0:3:0) and run 'admitpd <WWN>'
Please let me know how it goes.

Regards,
Srinivas Bhat

If you feel this was helpful please click the KUDOS! thumb below!
Note: All of my comments are my own and are not any official representation of HPE.