HPE 3PAR StoreServ Storage

Re: 3PAR- 7200c disk issue

 
Anjum_IK
HPE Pro

Re: 3PAR- 7200c disk issue

Hello @Dsinghp2002,

Good day!

Please try the below commands :

servicemag unmark 0 9
servicemag clearstatus 0 9
servicemag start -pdid 17

Note : We need to wait for servicemag start to Succeed before replacing the new drive.

Also please help me with the following output:

Showpd -i 17
showpd -s 17
Showpd -c 17

Showpdch -fail 17
showpdch 17

I work for HPE


If you feel this was helpful please click the KUDOS! thumb below!
Accept or Kudo


[Any personal opinions expressed are mine, and not official statements on behalf of Hewlett Packard Enterprise]
Dsinghp2002
Occasional Advisor

Re: 3PAR- 7200c disk issue

Dear Anjum,

 

Thanks for update, we already perform suggested steps except disk replacement.

13.jpg

14.jpg

15.jpg

16.jpg

Please confirm can perform same step with new drive ???

Anjum_IK
HPE Pro

Re: 3PAR- 7200c disk issue

@Dsinghp2002 

Thank You for the response.

I still see the servicemag start -pdid 17 command failed

Please help me with the below commands output:

showpd -p -cg 0 -mg 9 -s

showpd -p -cg 0 -mg 9 -i

showpd -p -cg 0 -mg 9 -c

After which we can check the new drive.

 

I work for HPE


If you feel this was helpful please click the KUDOS! thumb below!
Accept or Kudo


[Any personal opinions expressed are mine, and not official statements on behalf of Hewlett Packard Enterprise]