3PAR 8200

[HaythemMohamed]

Hi HP Team,

Please i want to know the exact steps to delete LUN from my HP 3PAR 8200 SAN Storage?
Appriciated 

[SUBHAJIT KHANBARMAN_1]

You haven't mentioned which tool you want to use to delete the LUN from 3PAR system.

From Command line you need to first unexport the VLUN from host then only you can delete the LUN from 3PAR.

So refer any CLI guide and look for command removevlun and removevv. For example from below guide refer page 304 & 306

https://support.hpe.com/hpesc/public/docDisplay?docId=c04204279

Hope this helps!
Regards
Subhajit

I am an HPE employee

If you feel this was helpful please click the KUDOS! thumb below!

**********************************************************************

[Sheldon Smith]

To delete the LUN:

• command line: removevlun.
• SSMC: Block Persona > Virtual Volumes. Select volume then Actions > Unexport.

You can then createvlun/Export the virtual volume to a different host.
Or delete the volume if you don't need it anymore.