HPE 3PAR StoreServ Storage

3PAR Move disk commands

 
SOLVED
Go to solution
fleuratgovori
Advisor

3PAR Move disk commands

Hi Community, 

 

I hope you all are doing well in this pandemic era!

First:

I want to move a disk (FC 10K) from slot 5 to slot 19 in cage2 (screenshot below), and then add an SSD in slot 5 to make pair and to balance the disks

cage2 - Copy.png

 

Second (same scenario but in cage3):I want to move a disk from slot 5 (FC 10K) to slot 19 in cage3  (screenshot attached), and then add an SSD in slot 5 to make pair and to balance the disks

cage3 - Copy.png

 

I have found some commands (in different forums) to move the disks but I wanted to check with you guys just to be sure, commands are as in below: 

Method 1: 

Method 1.png

Method 2:

Method 2.png

These are general commands, but in this scenario with one or ones is best to use?

Can you write me down the best method or commands for my scenario? 

 

Since 3PAR is in the Production system, can this affect the volumes or make a negative impact?

 

Thank you guys for the support !  

1 REPLY 1
sbhat09
HPE Pro
Solution

Re: 3PAR Move disk commands

Hello,

The 'Method 1' you listed is appropriate for your requirement.

Regards,
Srinivas Bhat

If you feel this was helpful please click the KUDOS! thumb below!


I am an HPE Employee

Accept or Kudo