3PAR upgrade

[Razvan_Burcea]

Hello everybody,

I would like to make an 3PAR OS upgrade form 3.3.1.410 (MU2) to the latest available/supported (3.3.2) but I don’t know the correct path of doing this. Also, I presume the SP might have to be upgraded too, so an upgrade path for this will be needed.

Already checked “Hewlett Packard Enterprise SPOCK” website but couldn’t locate any "3par_upgrade_matrix"

Any hint from your side will be very much appreciated.

Best regards!

[sbhat09]

Hello @Razvan_Burcea,

You can upgrade directly to the latest 3PAR OS version 3.3.2. No intermediate versions required.

Compatible SP OS is v5.0.9

Regards,
Srinivas Bhat

If you feel this was helpful please click the KUDOS! thumb below!
Note: All of my comments are my own and are not any official representation of HPE.

[Cali]

Hi,

look here:

SPOCK Home > Other Hardware > 3PAR > HPE 3PAR OS and Service Processor Upgrade Matrix

Cali

[Razvan_Burcea]

Thank you guys!