HPE 3PAR StoreServ Storage
1748046 Members
4861 Online
108757 Solutions
New Discussion юеВ

Re: 3Par 8200, cant create admin volume

 
MusaAz
Occasional Visitor

3Par 8200, cant create admin volume

Hello colleagues! I have a problem, i run ootb procedure on 3PAR 8200 vith 8 SSD's, but procedure can't be completed , an error appears on console, in VSP same problem:

Checking admin volume...
System has less cages than nodes; using -ha mag for admin volume
Creating admin volume.
Failed --
20 chunklets out of 20 are not clean yet
... will retry in roughly 15 seconds
... re-issuing the request
Failed --
20 chunklets out of 20 are not clean yet
... will retry in roughly 15 seconds

5 REPLIES 5
veeyarvi
HPE Pro

Re: 3Par 8200, cant create admin volume

Hello MusaAz,

The process would normally resume after these messages. Are all hardware like PDs normal?


I am an HPE Employee.
[Any personal opinions expressed are mine, and not official statements on behalf of Hewlett Packard Enterprise]
Accept or Kudo
MusaAz
Occasional Visitor

Re: 3Par 8200, cant create admin volume

Hello veeyarvi! I was waiting 1 day.

PD is normal, thaks!

veeyarvi
HPE Pro

Re: 3Par 8200, cant create admin volume

Hello MusaAz

That is something unusual. Better to log a case with the Support to get this checked.


I am an HPE Employee.
[Any personal opinions expressed are mine, and not official statements on behalf of Hewlett Packard Enterprise]
Accept or Kudo
CamilleG
Frequent Visitor

Re: 3Par 8200, cant create admin volume

Hello team, I have the same issue on 7200c running 3.3.1 MU1 full patchs when I wiped it and rerunn OOTB..
This cleanup action is being running since 2 days so I think it is in some kind of loop...
I tried to wipe again and rerun, still same issue.
This 3PAR is far away from being still supported so I can't ask to support.
I am HPE, can someone helps me ?
Thanks.

veeyarvi
HPE Pro

Re: 3Par 8200, cant create admin volume

Hello 3parFTW,

There are multiple reasons for the chunklet initialisation to fail starting from hardware failures to variable settings. If you are HPE, I think you can reach the support internally.


I am an HPE Employee.
[Any personal opinions expressed are mine, and not official statements on behalf of Hewlett Packard Enterprise]
Accept or Kudo