3par Dashboard grphs not working

[owahid]

hello

I have some dashboard componenet that have no data , even if the system reporer is enabled ?

Also when point to a cpg and find how many VMs exist in this VM but number is zero!!??

I have 3par 8200 , we are using Hyper-V 2012 R2 , 2016.

Is it working only with ALL SSD?

Is it working only For Vmware ?

can any one Help?

Thanks

[SUBHAJIT KHANBARMAN_1]

@owahid 

I think your query related SSMC.

You need to check first "Settings" Then check under "Application" there is one setting called "Advanced system performance and analytics reporting enabled"-> This needs to be "Yes"

From the screenshot it seems above setting enabled.

So next criteria is you need to have systems where only SSD drives then only Saturation data you can see.

Hope this helps!
Regards
Subhajit

I am an HPE employee

If you feel this was helpful please click the KUDOS! thumb below!

************************************************************************

[owahid]

Hello SUBHAJIT KHANBARMAN

Many thanks for your helpfull support , but I have a question : Is any of the component in the dashboard is not working for hyper-V and working only for Vmware?

[SUBHAJIT KHANBARMAN_1 · Accepted solution]

@owahid 

All Host systems with valid Operating System should be fine. I am unware of any such restriction.

Do you have any outstanding query on this topic?

If you have no further query and you are satisfied with the answer then kindly mark the forum as resolved so that everyone who are following this forum will get the update.

Hope this helps!
Regards
Subhajit

I am an HPE employee

If you feel this was helpful please click the KUDOS! thumb below!

*************************************************************************

[Cali]

And for App Vol Sets you have first to create the sets in the SSMC.

(It's between Volumes and CPG in the Menu)

Cali