HPE 3PAR StoreServ Storage

3par + Hp Proliant 380

Frequent Visitor

3par + Hp Proliant 380

I've a 3par 7200 which was connected to fiberswitch and connected to 4 servers. I've replaced that 3par and today I Just want connect 3par 7200 directly to a HP Proliant 380. I've created that server on 3parGui and configured WWN from fiber card. 











Now I tried to export a disk and I got this message, Server has no active paths, template will be created but no active Vluns will be created. 


I would like to know what is missing, thank you. 



Valued Contributor

Re: 3par + Hp Proliant 380

You could try to reset the FC ports where your server is connected to. I read you're also using other servers, make sure you also use the correct WWNs.
Using this PS command you can obtain the WWNs of a host:

Get-InitiatorPort | Select-Object -Property PortAddress | Format-List -Property PortAddress


Hit the Kudo's button to show appreciation or mark as solution if your question was answered.