HPE 3PAR StoreServ Storage
1748266 Members
3520 Online
108760 Solutions
New Discussion

Re: 3par showvlun status transit for rcopy after powerfailure

 
keesro
Visitor

3par showvlun status transit for rcopy after powerfailure

Hi,

after a powerfailure at our second site and network problems connecting to quorum witness we lost all our  data for a while..

After power was restored & rcopy's were recovered 3par seems normal showrcopy looking normal.
However rcopy vluns secondary on second site show status transit.

# showvlun -v b3VMFS5
Active VLUNs
Lun VVName  HostName -Host_WWN/iSCSI_Name-  Port     Type Status   ID
  6 b3VMFS5 Pqvfsxs1 100000109B400376      0:2:4 host set transit 258

If anyone can tell me how to resolve this would make me very happy as google does'nt know :)

 

1 REPLY 1
keesro
Visitor

Re: 3par showvlun status transit for rcopy after powerfailure

eventlogs of primary 3par contained the following entries (soon after secondary 3par failed ) :

Message  : Task 4262 (type "remote_copy_failsafe", name "Esxview_loc1") has completed.
Message  : Task 4263 (type "remote_copy_failsafe", name "Esxback_loc1") has completed.
Message  : Task 4264 (type "remote_copy_failsafe", name "Devbuc2_loc1") has completed.

this led me to the following:

Overriding failsafe state
From the command line, this is done by issuing the
"setrcopygroup override"
subcommand on a group or
list of remote copy replication groups.

Did the trick :)