HPE 3PAR StoreServ Storage
1748216 Members
3356 Online
108759 Solutions
New Discussion юеВ

Re: 7400 Add Physical disk problem

 
SOLVED
Go to solution
Deblu
New Member

7400 Add Physical disk problem

Hi

I have a 3par 7400 storage and I have added 4 Physical disks to the enclosure, But the Allocated percentage is different from others.

The others is 61% new is 39%

Is that right or I have to type some command to balance the percentage?

Thanks!

4 REPLIES 4
yapkl
Trusted Contributor

Re: 7400 Add Physical disk problem

Did you do a tunesys after adding the drives?

Best Regards,

yapkl

Note: The opinions & comments above are my personal opinions, not of Hewlett Packard Enterprise
----------
If my post was useful, click on my KUDOS! thumb below! Thanks.
Deblu
New Member

Re: 7400 Add Physical disk problem

Hi yapkl

Thanks for your reply.

Its been a longtime ,I cant remember. cloud you tell me the format of tunesys?

thanks

yapkl
Trusted Contributor
Solution

Re: 7400 Add Physical disk problem

Old info but I think still relevant - find it in SSMC.

https://d8tadude.com/2015/05/04/ssmc-2-1-whats-new/

Best Regards,

yapkl

Note: The opinions & comments above are my personal opinions, not of Hewlett Packard Enterprise
----------
If my post was useful, click on my KUDOS! thumb below! Thanks.
Dennis Handly
Acclaimed Contributor

Re: 7400 Add Physical disk problem

@Deblu

tunesys -h