Nodes not visible in SSMC

[vmuniverse]

I have noticed that my Controller Nodes and Ports are not visible anymore in 3PAR StorServ (3.2.023766)
When I go to Block Persona --> Hosts and show Map, it doesn't show the two controller nodes anymore
I have two switches are HP SN3000B (firmware 8.1.1) Both are SmartSAN enabled (license available)
The HP3Par firmware is 3.3.1.269 (MU1)+P07,P11
The VSP is 5.0.1.0-23799
 
When I look in the 3PAR StoreServ --> Storage Systems --> Ports, I see "No Ports"
My Hosts do have a connection to the 3PAR LUNS

[Cali · Accepted solution]

I have seen this Issue on 4 Systems with 3.3.1 and SSMC.

Sloution:

Login to SSMC as Administrator, remove and add the 3PAR.

[Dennis Handly]

Are they visible in the CLI?

shownode  showport

[Cali]

Yes. Only SSMC problem.

[vmuniverse]

Remove and add to the SSMC console did the trick!

Thanks!