Creating Virtual Volumes Sequentially

[B_Davis]

IHAC who noticed that multi-volume creation doesn't let you specify the next increment from the SSMC GUI (Version 2.2). Example: Create Volume "ABC_Test" 10x's starting at ".12". When you need 5 more volumes with the same name sequence it freaks. Example: "ABC_Test.22" ....... "ABC_Test.22.6" 

What they'd like to see is the following: 

"ABC_Test.22" ...... "ABC_Test.26" 

[Sheldon Smith]

Correct. For that they will need to use the command line:
createvv -cnt 5 [options] <usr_cpg> ABC_Test.22 <size>

Note: While I work for Hewlett Packard Enterprise, all of my comments (whether noted or not), are my own and are not any official representation of the company.
----------
If my post was useful, click on my KUDOS! thumb below!

[BBouldin]

You can do this with SSMC 2.3.1. When you create the second set of volumes, use the form <name>.<next #> and then specify how many additional volumes you want in the Additional Settings section.

So the name you'd start with for the second set of volumes in your example would be ABC_Test.22 and SSMC would create ABC_Test.22 through ABC_Test.26, when the Number of volumes is 5.