Degraded Disk

[Tabriz1]

Hi Dear Community,

 How can l  change state to normal the 1 0:1:0 FC 10 degraded disk?

Thanks

Id CagePos Type RPM State Total Free A B Capacity(GB)
1 0:1:0 FC 10 degraded 1142784 0 ----- ----- 1200
13 0:13:0 FC 10 failed 1142784 0 1:0:1 0:0:1* 1200
51 3:3:0 FC 10 failed 1142784 0 1:0:2 0:0:2* 1200
86 5:6:0 FC 10 failed 1142784 0 3:0:1* 2:0:1 1200

[JoshJames]

Hello, Hope you are doing well!

The Storage Array designates a drive as "failed" only if it detects some kind of hardware fault with the Disk. in such cases, you may have to replace the drive.

For multiple drive failures, it is best to consult an HPE technical Specialist, so that they can review the logs and give you an apt response.

If you feel this was helpful please click the KUDOS! thumb below!