Community
HPE 3PAR StoreServ Storage

Different between device type and device protocol

 
Ahmed_ko
Occasional Contributor

‎07-13-2015 05:11 AM

‎07-13-2015 05:11 AM

Different between device type and device protocol

on 3par console for physical disks. There are device type and device protocls for each disk.

 

I need to know what is the difference between them.

0 Kudos
Reply
2 REPLIES 2
Torsten.
Acclaimed Contributor

‎07-13-2015 05:19 AM

‎07-13-2015 05:19 AM

Re: Different between device type and device protocol

Depending on the 3par array model it is using either real fibre channel disks or SAS disks.

The main difference is the communication between controllers and disks, e.g. the 7000 series is using SAS connections, the 10000 series is using FC connections (and adapters for SAS disk interfaces to "translate" to FC).


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
Dennis Handly
Acclaimed Contributor

‎07-13-2015 11:14 AM - edited ‎07-13-2015 11:17 AM

‎07-13-2015 11:14 AM - edited ‎07-13-2015 11:17 AM

Re: Different between device type and device protocol

>I need to know what is the difference between them.

 

The device type tells you the size and speed: SSD, FC (Fast Class), NL (Nearline).

 

The protocol tells you how array or bridge talks to the disk.  Important if you're ordering disks.

 

0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.