HPE 3PAR StoreServ Storage
1748228 Members
4421 Online
108759 Solutions
New Discussion

EVA to 3PAR migration - OS Host mode ?

 
Marc0
Advisor

EVA to 3PAR migration - OS Host mode ?

We're planning to move some disks from one of our eva's to a 3par.

So, i added the 3par as a host to the eva, but what OS host mode setting is correct here ?

So far the type is set to unknown, since the 3par OS is based on RedHat i tend to set it to "Linux" but probably there is a correct setting of "Unknown" including a 16digit hexcode ?

Is there such a code and where can i find it?

 

 

P.S. This thread has been moved from Storage Area Networks (SAN) (Enterprise) to HP 3PAR StoreServ Storage. - Hp Forum Moderator

1 REPLY 1
giladzzz
Honored Contributor

Re: EVA to 3PAR migration - OS Host mode ?

Hi

when you create a migration job from EVA to 3PAR via command view the first job

creates the 3PAR host in command view. that is if the zoning between the EVA and 3PAR are

correct and everything is configured corectly in command view acording to

the EVA to 3PAR migration guide.

Regards.