I'm working on doing an EVA to 3Par online import between an EVA 4400 and 3Par V400 using CommandView
10.3.6.150143. I'm 95% certain I have the zoning correct; the tool passes all the pre-flight checks and only fails at the final migration screen with the following error: "Volume <UUID" is only accessible through one peer port":
I found a troubleshooting article that advised checking the targets on the 3Par as well as manually presenting the EVA LUN to the 3Par directly. I did that and everything looks good in the command output.
HPN-3Par-3 cli% showtarget
Port ----Node_WWN---- ----Port_WWN---- ------Description------
0:2:1 5001438004C5E180 5001438004C5E189 reported_as_scsi_target
0:2:2 5001438004C5E180 5001438004C5E188 reported_as_scsi_target
HPN-3Par-3 cli% showtarget -lun 5001438004C5E188
---Size(MB)---
Lun ----Node_WWN---- ------------Lun_WWN------------- Device_Type -VSize- -Rsvd- --MFR--- -State- -Vendor_Specific-
0 5001438004C5E188 5001438004C5E180 unknown 0 NA HP -- NA
1 5001438004C5E188 600508B4000987100000700000380000 disk 1024000 NA HP -- NA
HPN-3Par-3 cli% showtarget -lun 5001438004C5E189
---Size(MB)---
Lun ----Node_WWN---- ------------Lun_WWN------------- Device_Type -VSize- -Rsvd- --MFR--- -State- -Vendor_Specific-
0 5001438004C5E189 5001438004C5E180 unknown 0 NA HP -- NA
1 5001438004C5E189 600508B4000987100000700000380000 disk 1024000 NA HP -- NA
