HPE 3PAR StoreServ Storage
1748123 Members
3154 Online
108758 Solutions
New Discussion

Re: HPE 3PAR CLI version 3.2.1.MU3

 
pbubentsov
New Member

HP 3PAR Command Line Interface version over 3.2.1.MU3

I need to download HP HP 3PAR Command Line Interface over 3.2.1.MU3. I have problem with connect to 3par storage, but i dont have SAID

 [srv ~]$ /opt/hp_3par_cli/bin/cli -sys 192.168.0.1 -pwf /opt/omni/lbin/DPBACK_HOME/mgt_p7000_1.pwf showversion
Could not open connection to CLI server process on "192.168.0.1":
Socket connection timed out to port 2550 on 192.168.0.1
System name or port may be invalid, or the process may not have started yet
or may have failed.
[srv ~]$ /opt/hp_3par_cli/bin/cli -sys 192.168.0.1 -pwf /opt/omni/lbin/DPBACK_HOME/mgt_p7000_1.pwf -tpdportnum 5783 showversion
Could not open connection to CLI server process on "192.168.0.1":
Could not read socket to port 5783 on 192.168.0.1: Connection dropped
System name or port may be invalid, or the process may not have started yet
or may have failed.

2 REPLIES 2
Cali
Honored Contributor

Re: HP 3PAR Command Line Interface version over 3.2.1.MU3

Download is only admitted, if the Customer have Support for the 3PAR.

If you have Support and dont know the SAID, open a Case with the Serial Number and ask, or look at https://www.storefrontremote.com/ this shows the SAID.

ACP IT Solutions AGI'm not an HPE employee, so I can be wrong.
Dennis Handly
Acclaimed Contributor

Re: HPE 3PAR CLI version 3.2.1.MU3

> I have problem with connect to 3PAR storage

 

What version do you have?  I doubt 3.2.1 MU3 CLI will work any better.  Have you disabled all CLI ports?

You also can connect to the array using ssh.