HPE 3PAR StoreServ Storage

HP 3PAR StoreServ 7200 POWER USAGE

 
ne1scott
Occasional Visitor

HP 3PAR StoreServ 7200 POWER USAGE

i am currently using the "HP 3PAR Management Console" but not seeing any vurrent power usage readings.

I assume this information should be availabe in this app but if not can I see them from the CLI ?

I have 32 x 850GB Hitachi disks installed in a total of 2 shelves and need to estimate power consumption for moving to a datacenter.

 

I am a 3par newb, but not an HPE newb.

2 REPLIES 2
ne1scott
Occasional Visitor

Re: HP 3PAR StoreServ 7200 POWER USAGE

Using the CLI and typing "shownodeenv" but the numbers aren't helping with overall power consumption since the input voltage is 220V.

Node 1
---------

Measurement Reading Lo_Limit Hi_Limit Status
Ambient 23 C 5 C 40 C Within Tolerance
Midplane 27 C 10 C 50 C Within Tolerance
PCM 0 inlet 19 C 10 C 50 C Within Tolerance
PCM 0 hotspot 25 C 10 C 65 C Within Tolerance
PCM 1 inlet 24 C 10 C 50 C Within Tolerance
PCM 1 hotspot 30 C 10 C 65 C Within Tolerance
SBB Canister 0 35 C 15 C 69 C Within Tolerance
SBB Canister 0 39 C 15 C 72 C Within Tolerance
SBB Canister 0 48 C 15 C 60 C Within Tolerance
SBB Canister 0 40 C 15 C 52 C Within Tolerance
SBB Canister 0 near CPU 52 C 5 C 77 C Within Tolerance
SBB Canister 0 CPU2 49 C 10 C 82 C Within Tolerance
SBB Canister 0 memory 41 C 5 C 82 C Within Tolerance
SBB Canister 1 35 C 15 C 69 C Within Tolerance
SBB Canister 1 38 C 15 C 72 C Within Tolerance
SBB Canister 1 49 C 15 C 60 C Within Tolerance
SBB Canister 1 40 C 15 C 52 C Within Tolerance
SBB Canister 1 near CPU 49 C 5 C 77 C Within Tolerance
SBB Canister 1 CPU2 45 C 10 C 82 C Within Tolerance
SBB Canister 1 memory 43 C 5 C 82 C Within Tolerance
PCM 0 (5V) 5.15 V --- --- Within Tolerance
PCM 0 (40A Max) 2.92 A --- --- Within Tolerance
PCM 0 (12V) 12.26 V --- --- Within Tolerance
PCM 0 (56A Max) 9.21 A --- --- Within Tolerance
PCM 1 (5V) 5.15 V --- --- Within Tolerance
PCM 1 (40A Max) 4.53 A --- --- Within Tolerance
PCM 1 (12V) 12.26 V --- --- Within Tolerance
PCM 1 (56A Max) 9.14 A --- --- Within Tolerance
Node 12.00V 12.18 V 11.40 V 12.60 V Within Tolerance
Node AUX 12.00V 12.21 V 11.40 V 12.60 V Within Tolerance
HBA 12.00V 12.12 V 11.40 V 12.60 V Within Tolerance
Node 5.00V 4.96 V 4.75 V 5.25 V Within Tolerance
Node AUX 5.00V 4.99 V 4.75 V 5.25 V Within Tolerance
Node 3.30V 3.30 V 3.13 V 3.47 V Within Tolerance
HBA 3.30V 3.30 V 3.13 V 3.47 V Within Tolerance
FPGA 3.30V 3.29 V 3.13 V 3.47 V Within Tolerance
PCIe SW 2.50V 2.47 V 2.37 V 2.63 V Within Tolerance
PHY0 1.90V 1.89 V 1.80 V 2.00 V Within Tolerance
PHY1 1.90V 1.93 V 1.80 V 2.00 V Within Tolerance
CPU PLL 1.80V 1.74 V 1.56 V 1.96 V Within Tolerance
PCIe SW 1.50V 1.48 V 1.42 V 1.58 V Within Tolerance
Node 1.20V 1.20 V 1.14 V 1.26 V Within Tolerance
PCH 1.10V 1.09 V 1.04 V 1.15 V Within Tolerance
CPU 1.05/1.0V 1.05 V 0.95 V 1.10 V Within Tolerance
Node 1.00V 1.00 V 0.95 V 1.05 V Within Tolerance
CPU VCCP 0.85V 0.83 V 0.70 V 1.20 V Within Tolerance
CPU VSA 0.90V 0.89 V 0.70 V 1.20 V Within Tolerance
DDR2 VDDQ 1.80V 1.82 V 1.70 V 1.89 V Within Tolerance
DDR2 VTT 0.90V 0.88 V 0.85 V 0.95 V Within Tolerance
DDR3 VDDQ 1.37V 1.36 V 1.30 V 1.44 V Within Tolerance
DDR3 VTT 0.68V 0.67 V 0.65 V 0.72 V Within Tolerance
Node Input 12V 12.16 V 11.40 V 12.60 V Within Tolerance
Node Input Cur 6.34 A 0.00 A 22.00 A Within Tolerance
Node Input PWR 77.0 W 0.0 W 264.0 W Within Tolerance
LM87 Int Temp 43.0 C 0.0 C 68.0 C Within Tolerance
LM87 Ext Temp 37.0 C -4.0 C 60.0 C Within Tolerance
LM92 Int Temp 42.0 C 0.0 C 64.0 C Within Tolerance
LM94 Int Temp 38.4 C 0.0 C 72.0 C Within Tolerance
LM94 Ext Temp 40.0 C 0.0 C 67.0 C Within Tolerance
CPU Current 4.50 A 0.00 A 59.00 A Within Tolerance
N VCC_DIV 5.28V 5.05 V 5.00 V 5.54 V Within Tolerance
N V3_DIV 3.3V 3.26 V 3.13 V 3.47 V Within Tolerance
N P2V5 2.50V 2.50 V 2.37 V 2.63 V Within Tolerance
N P1V2 1.20V 1.20 V 1.14 V 1.26 V Within Tolerance

ne1scott
Occasional Visitor

Re: HP 3PAR StoreServ 7200 POWER USAGE

I ended up multiplying the voltage times the amperage for the items listed in that output for both node0 and node1.

I wasn't sure what voltage to use with the CPU Current amperage so I used the 5V current reading for each node.

These are the numbers I used to calculate node0.   Luckily they are close to what I estimated at 115 for the enclosure plus 15W per drive with 16 drives per enclosure. (355 W)

PCM 0 (5V) 5.15 V --- --- Within Tolerance                                          15.04 W
PCM 0 (40A Max) 2.92 A --- --- Within Tolerance
PCM 0 (12V) 12.26 V --- --- Within Tolerance                                      112.91 W
PCM 0 (56A Max) 9.21 A --- --- Within Tolerance
PCM 1 (5V) 5.15 V --- --- Within Tolerance                                           23.33 W
PCM 1 (40A Max) 4.53 A --- --- Within Tolerance
PCM 1 (12V) 12.26 V --- --- Within Tolerance                                       111.14 W
PCM 1 (56A Max) 9.14 A --- --- Within Tolerance

Node Input 12V 12.16 V 11.40 V 12.60 V Within Tolerance
Node Input Cur 6.34 A 0.00 A 22.00 A Within Tolerance                   77.09 W

CPU Current 4.50 A 0.00 A 59.00 A Within Tolerance                       23.00 W
N VCC_DIV 5.28V 5.11 V 5.00 V 5.54 V Within Tolerance 

---------------------------------------------------------------------------------------------

                                                                                                                362.51 W total for node 0

 

Hopefully this helps someone else out;.