HP 3par OS 3.3.1 EMU1 upgrade after upload ISO don't have the authority to perform the update

amir4982 · ‎01-21-2020

HI

after load HP OS 3.3.1 EMU1 with VSP 5.0.6 when start install alert don't have the authority to perform the update.

Torsten. · ‎01-21-2020

Did you use the hpepartner user? The admin user cannot do upgrades.

However, you should upgrade to MU2 or MU3.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!

amir_sh · ‎02-09-2020

hi

current firmware is 3.2.2 EMU4 i can direct upgrad to 3.3.. EMU1 .

my current VSP VER is 5.0.6 upload the OS 3.3.1 and verify sucessfuly but when want to upgrad show you dont have authority to perform the update.

kahna · ‎04-27-2020

Hi amir_sh

Did you manage to find out , what was the problem?

Could you update the system?

yt,k

HP 3par OS 3.3.1 EMU1 upgrade after upload ISO don't have the authority to perform the update

HP 3par OS 3.3.1 EMU1 upgrade after upload ISO don't have the authority to perform the update

Re: HP 3par OS 3.3.1 EMU1 upgrade after upload ISO don't have the authority to perform the update

Re: HP 3par OS 3.3.1 EMU1 upgrade after upload ISO don't have the authority to perform the update

Re: HP 3par OS 3.3.1 EMU1 upgrade after upload ISO don't have the authority to perform the update

Hewlett Packard Enterprise International