HPE 3PAR StoreServ Storage
1748051 Members
5120 Online
108758 Solutions
New Discussion юеВ

Re: HPE 3Par Disk LEDs status?

 
A.W.R
Frequent Advisor

HPE 3Par Disk LEDs status?

Hi,
We have an HPE 3Par 8200. We have noticed that on a few of the drives the status LED burns amber, but the green activity light still flashes. We have found hte following entries in the logs:-

Degraded,5,Resolved by System,Jul 07 2016 21:04:49 CAT,Port 0:0:1 Degraded (Target Mode Port Went Offline {0x3} ),6,May 24 2016 18:04:39 CAT
Degraded,6,Resolved by System,Jul 07 2016 21:04:49 CAT,Port 1:0:1 Degraded (Target Mode Port Went Offline {0x3} ),6,May 24 2016 18:04:39 CAT
Degraded,22,Resolved by System,Jul 07 2016 13:58:19 CAT,The PR is currently getting data from the internal drive on node 0 not the admin volume. Previously recorded alerts will not be visible until the PR transitions to the admin volume.,0,Jul 07 2016 13:58:19 CAT
Degraded,20,Resolved by System,Jul 07 2016 13:57:14 CAT,Cage 2 Degraded (Loop Offline {0x10} ),2,Jul 07 2016 13:56:48 CAT
Degraded,19,Resolved by System,Jul 07 2016 13:56:47 CAT,Cage 3 Degraded (Loop Offline {0x10} ),0,Jul 07 2016 13:56:47 CAT

Is it possible someone can give us insight into these errors, and how to reset the LEDs to their normal state?

Thanks

Andrew

2 REPLIES 2
Dennis Handly
Acclaimed Contributor

Re: HPE 3PAR Disk LEDs status?

What does "showpd -s -failed -degraded" show?

darwine
Occasional Contributor

Re: HPE 3Par Disk LEDs status?

Hi,

So, have you find the answer or resolution?