HPE 3PAR StoreServ Storage

Limit (QoS) traffic over the fibers when activating full sync operations.

 
SOLVED
Go to solution
Mvhkbc
Advisor

Limit (QoS) traffic over the fibers when activating full sync operations.

Hi 3PAR users , question on remote copy.
Is it possible to limit (QoS) traffic over the fibers when activating full sync operations. It seems the sky is the limit and all resouces go to that full resync, triggering DELACK's etc. .

1 REPLY 1
sbhat09
HPE Pro
Solution

Re: Limit (QoS) traffic over the fibers when activating full sync operations.

Hello,

Yes. You can set the the QoS with 'setqos' command. As I am not very sure about your exact requirement, I am giving you the document reference so that you can customize the command by referring to the document.

Document URL: https://support.hpe.com/hpesc/public/docDisplay?docId=c04204279

Please refer the 'setqos' command in page no 378.

Hope this helps.!

Regards,

Srinivas Bhat

If you feel this was helpful please click the KUDOS! thumb below!


I am an HPE Employee

Accept or Kudo